开云体育

Hello, maybe someone can answer me the question please, I didn't find anything in the documentation. What do the zeros mean in the line? K7MBBS-4 audio level = 19(4/4)? ? 000000___ K7MBTS audio

Thanks for the reply, Looks like that worked :)

Hi Dave, I went over the ptt.c file and compared the debug output I had for the Direwolf startup. There didn't seem to be any errors as it follows the libgpiod syntax completely. My guess right now is

Yes, there are automated regression tests. $ cmake -DUNITTEST=1 .. $ make $ make test A Mac development expert (which I am not) will need to address the other concerns. 73, John WB2OSZ

This might be helpful for getting fldigi to work with an IC-7300. https://sourceforge.net/p/fldigi/wiki/7300_howto/

Help me to understand this please. I cannot tx to the IC-7300 from Fldigi. Is the 00 the problem? Thanks for your help.

Good morning, John, Yes indeed I noticed that now he is at ? MM ? Thanks for your help I learned something else, how to properly adjust our audio Thank you and good day Luc Drolet VE2 LUQ Président

I have found that receive works better if mic AGC is turned off. These tips are in the Troubleshooting section of: https://github.com/wb2osz/direwolf/blob/dev/doc/ *Raspberry-Pi-APRS.pdf* (

Good morning, John, OK, actually I didn't know that it was wrong to put the number ? 00 ? at the bottom of the sliders Ha Ha, yes, it's working fine now Thanks for your help here's a photo here is a

Do you see MM or 00 here in alsamixer? If you have MM, that means muted.? Press m to change.

Hello Andre, I bought 10 CM-108 so one for my first I-GATE site which works well I am attaching a photo of my CM-108 key, because a picture is worth a thousand words there I want to build another one

Luc, Do you have a real CM108? Or one of the counterfeits (where they conveniently put a dab of paint on the chip so you can't read the part number)? I have found that the counterfeits can jam up and

Hello Jonh, Yes, I also adjust the volume to the maximum and there is still no sound in my headphones on the CM-108 Luc Drolet VE2 LUQ Président de VE2CVA C.R.A.V.A. Club Radio Amateur Vallée de

I have a few sections in my doc starting at https://www.trinityos.com/HAM/CentosDigitalModes/RPi/rpi4-setup.html#20d.soundcard-mixer that should help here to test your CM108 sound device with using

Did you set the output volume and ensure it is not muted?

Hi David, only for more info here is the version of my Direwolf thank you and good evening ? Luc Drolet VE2 LUQ Président de VE2CVA C.R.A.V.A. Club Radio Amateur Vallée de l'Amiante VE2 CVA

Hello David, Wow, indeed, good idea to check the performance of my CM108, I hadn't thought of that but sorry there is no audio output from my CM108 Direwolf -x a I can't hear anything in my headphones

I would connect some headphones to the output of the CM108 device and then check the device's playback mixer settings. --David KI6ZHD

Hello everyone, I already have an I-GATE on top of a mountain and I want to make another one with DIREWOLF and i have a little problem for the RX it's going well it works well in my opinion But for

I was reading the user guide and it says to use the macports versions of coreutils, portaudio and cmake. Apparently coreutils didn't work out of the box and macports was needed. When I tried building