开云体育

Rob is right here (sorry for the confusion). I did have them reversed BUT it's the "DATA IN" signal that also needs the ability to enable or disable the application of pre-emphasis if your radio

The Data Jack (6-pin mini-DIN) on radios does NOT have a 9600 baud TX pin.There are 6 pins in the jack:1??? PKD (Data In) 2??? GND3??? PTT4??? RX96005??? RX12006??? SQL The TC path

Hello Patrick, I cannot help you with YACC APRS application running over Java but I would assume you have a configuration issue with that application. Consider joining the YACC support group at

Hello Neil, I think you you're seeing the effect of pre-emphasis or the lack of it. When you connect your packet equipment to your radio, more basic radios can only be connected using their

OK, I seemingly overlooked the volume on the sound interface and have confirmed direwolf sees traffic but YAAK isn't, not sure why since YAAK does report a connected application on port 8001 when I

OK, so yea, going to need some help. I'm finding it a bit overwhelming. Direwolf is capable of doing quite a bit considering. The biggest issue I'm having right now is trying to target the correct

d'oh.? This was originally supposed to appear under the 'Headaches with direwolf + linpac ' topic.? Look there for context.

Based on suggestions, I tried to follow https://www.febo.com/packet/layer-one/transmit.html using the direwolf calibration tones(-x). For my test setup I have a C-Media USB Audio attached to a yaesu

On my surfing computer I have APRSIS32 putting WB8LBZ-3 on the map. On my main mobile, I have a Byonics TinyTrak3Plus/GPS/Icom 2100 On my backup mobile, I have a Byonics TinyTrak3Plus/GPS/Icom 2100 or

Hi Chris, Computer: Raspberry Pi (32-bit) Soundcard 1: External USB soundcard Soundcard 2: Yaesu FT-991A USB interface Software: Direwolf, LinBPQ, Linpac, Winlink Express, PuTTY Notes: I run one

Thanks! ?That worked a treat. ? I took it to 5. Hopefully, the 8 GB RPi4 it’s running on can handle 5 fine. ?Thanks again.

Thank you for the reply. I've given that a go before though I may have missed what I was looking for and I don't think I realized it was the official Direwolf howto guide so let me give it a go again

A friend of mine and I are getting more and more into APRS. We love the messaging and optional tracking/Txing location features. We plan to use it for off the grid stuff such as hiking, search and

kiss_frame.h: ------------- // The default is a limit of 3 client applications at the same time. // You can increase the limit by changing the line below. // A larger number consumes more resources

Thank you Greg for taking the time to respond. 73 de Prof. Chris Lance www.WW2BSA.org www.Network105.org

Hello J K, It's unclear if Direwolf's support can be expanded to support more sound devices but I bet the hard work is in the *test* of this change. I really doubt many people would need such a

Hello Patrick, This is very possible. Only one sound device will be available at any one time to a program but if you operate "digital HF" on your FT857 using SCU-17#1 while you operate "VHF APRS"

WB7GR-10 APRS digi / igate Computer: Rpi 3B+ / 32 bit / buster / direwolf 1.6 Generic Fleabay Soundcard Radio: Kenwood TH-79 ht Greg Rix, WB7GR gregrix@...

Setup... FTM-857D FTM-300DR 2 x SCU-17 Linux Mint 20.3 AMD Ryzen Embedded 1605B 16GB I'm trying to figure out how to configure Direwolf to act as a TNC for the 300. Yes the 300 has APRS built in but

Can Direwolf be compiled so it supports more than three clients? Sent from my iPhone 13 Pro Max