开云体育

Hello John, Agreed! Well, every OS is different in it's mixer settings. What radio are you using and how is the Signalink connected to that radio? I assume the RX knob on the front of the Signalink is

Please excuse me if this topic has been dealt with before, but my quick search did not give me the info I think I need. I am setting up a RPi 3 -based IGate with a Signalink audio codec. The command

Great news. It's working! I installed the Gnome Alsa Mixer as suggested by Patrick. I had to check the "Record" box and the audio level jumped up. I adjusted the audio level (was way too high) and it

I loaded the Gnome ALSA mixer on my Pi, as I'm more comfortable with a GUI. Some of the input sliders have a check box marked "Rec." (Record). Perhaps that is cause of your issue.?Patrick (N3TSZ) To:

Odroid-c2 is readily available and not too picky about SD card..... Get Outlook for Android<https://aka.ms/ghei36> ________________________________ Sent: Saturday, February 4, 2017 2:38:25 PM To:

ive seen Davids messages like that many times, i thought he was just being friendly :) and have seen others pop up that way as well

picky about sd cards or not neither of the ones i have ever put out anything on the HDMI port monitor says "no signal" tried many different power supplies as i had read they were pick about that as

David, Okay. We're not there yet, but we're getting somewhere. I removed the dash from the ADEVICE line and now the terminal indicates "Audio device for both receive and transmit: plughw:1,0 (channel

I'm responding to my own post for an update.... This is a portable telemetry system, so ended up getting recommended GPS unit. So, now implement TBEACON with compressed location using COMMENTCMD.

I gather there are a lot of QA issues with these also they are very picky with memory cards. I used a 32GB class 10 Integral brand with mine. I just wanted to try something different to a Pi! 73 Nick.

Hi Dan, I discovered that the GPIO pins are not the same as the Pi and have to be defined in a FEX file. I do have the GPIO working now by creating 4 GPIO ports then using GPIO3 for PTT on pin22 and

Hello! I am interested too in GPIO settings for Orange PI (One, Lite) for working with PTT, SQUELCH, but my Linux programing skill are at low level... Please share your progress about this issue.

Hello Randy, Yeah.. sorry about thast. I think there is something wrong with the new K9 Email reader for Android. Nice work about thinking to looking at the HTML source to see the plain text email!

David, I was finally able to see what you said by clicking "view source". I have spent a lot of time on this and have read the documentation...over and over and over again. I have read many other

hello Nick i orderd a OP1 in October and it came from China just at the end of November it was DOA they wanted me to send it back then they would send me another of course the return shipping was more

David, I don't know what's wrong here but all I see when I open you post is "Hello <no name given>". Could you repost what you said. Thanks. Randy

I just got myself a cheap Orange Pi SBC to experiment with and to see how it compares with my Rpi and Pi3. These devices are available for around 12USD from the far east although I paid slightly more

We have been noticing this on a Raspberry Pi, using a DIO for PTT control. It happens randomly, but at a much longer timeframe - a couple weeks to a month or so. The system is remote, so we can't

Hello <no name given> I would argue that it's 99% for sure that if you can't record the audio coming in from the USB soundcard's microphone jack, something is wrong. I would not worry about Direwolf

Okay...tried the recording and nothing on it. I had tried this before with the same results. I sent the wav file to my PC and it was silent. Other wav files play fine on my PC. Is it for sure that if