开云体育

Yes, there are two issues here. I have recently been testing Direwolf for this. you can limit what you send to the APRS-IS, by putting in a filter like this in the config file: "FILTER 0 IG

Yes, I have a RX-only IGate. Below is a snip (with the receiver off) of a bunch of data coming from the internet that wants to be transmitted. It's about 5 minutes worth. I realize it isn't a lot, but

Arnold, It seems you want to undertake a RX-only IGate. AFAIK, it doesn't matter if you are using direwolf or anything else, if you are directly connected to an APRS-IS server TCP port 14580, you will

I have a receive only IGate using DireWolf. I would like to stop ALL traffic coming from the IS server that wants to be transmitted, but I don't know the best parameter(s) to enter. Suggestions? I

Thx David, Yes, I changed the direwolf port to 8005. Will do with the winlink folks, but I guess the question will always surface on who uses what port. But I guess you are just saying the error

After testing and studying various documents, I would like to recommend the following entries in the Direwolf config file for a home (WIDE1-1) digi: as the direwolf documentation recommends, to not

Hey Tom, So you changed Direwolf port 8001 to something else? I would argue that the error coming from Winlink is misleading (it's not a file, it's a socket on Windows). I'd recommend you file a bug

Some users of direwolf, dstarrepeater, and fldigi may find this useful, especially for mobile operation.

No problem. Glad to know you got it working. Matthew PittsN8OHU? Sent from an Android Device

Mathew, Thx a bunch... that was the problem. changed direwolf tcpip port and everything works as advertised. ...73 Tom ve7did

Tom, Have you tried a different tcpip port for direwolf? It sounds like whatever port it's set for is the same as what Winlink Express is usig for the forms engine. Matthew PittsN8OHU? Sent from an

David, Thx for the reply. The error is an RMS Express error. I did reboot the computer and no change, If I use RMS by itself (or with a KPC-3+) there are no problem as I tried it a number of times and

Hello Tom, When you say "the program comes up with an error", you're talking about RMS Express? That's an RMS Express error and you really need to talk to those people as it has no bearing on

Using direwolf with win express and it works fine if I use text templates. Using the new HTML form template files with a standard tnc everything works great. If direwolf is used (start direwolf then

I know that Linrad does implement this .. and to avoid the "cross talk" uses a tone that is above the bandpass of the radio that is to be used for Rx/Tx ... but is still used by the audio Tx circuit

Hello Mike, Direwolf has native GPIO support (Raspberry Pi, BeagleBoneBlack, etc) but hamlib also supports limited GPIO functionality for the CM108 USB chip. I'm sure it's possible.. you'll just need

Hello Mike, To be honest, I would recommend to read the Direwolf DEV branch's docs as there is lots of new docs in there, new features, etc. It's not a stable release but it's reliable for my uses.

Thats great ... gives some insight .... So the GPIO is not through direwolf but hamlib ? wonder if i can use 2 hamlib rig at the same time ... Meh ... im wishing for GPIO input from my microphone to

I downloaded them with in a week of each other im sure ... PTT RIG 2 localhost:45XX And direwolf is working with quisk SDR software ... How cool is that .... ________________________________ Sent:

How weird ... my laptop in my living room has version 1.2 and my Odroid has version 1.3 ... thats why there is a discrepancy .... ________________________________ Sent: Monday, November 7, 2016 1:09