Re: Rx only iGate - stop Tx data [1 Attachment]
|
Yes, there are two issues here. I have recently been testing Direwolf for this.
you can limit what you send to the APRS-IS, by putting in a filter like this in the config file: "FILTER 0 IG ? r/40.8/-77.8/50 ?| t/m "
APRS-IS will only receive position packets within 50 km of some point near me, and messsages that might come from anywhere.
This will trap the stray packets that you might get by ducting, for example. That will minimize what is sent to direwolf to decide what to do with messages.
In my experience, you can also reduce the incoming data flow but logging into an APRS-IS server that uses aprsc software - it seems to be more conservative. YMMV.
73,?
Jim A.
On Thu, Nov 17, 2016 at 2:33 PM, kq6di@... [direwolf_packet] <direwolf_packet@...om> wrote:
?
[Attachment(s) from kq6di@... included below]
Yes, I have a RX-only IGate.? Below is a snip (with the receiver off) of a bunch of data coming from the internet that wants to be transmitted.? It's about 5 minutes worth.? I realize it isn't a lot, but I intend to locate the RX-only IGate & digipeater in a location that has rather limited internet capabilities.? Is there a filter to hopefully send to the server that will reduce this some? Believe it or not, this entire installation is solar powered, so even transmitting each packet requires power from somewhere...
Check out the automatic photo album with from this topic.
Have you tried the highest rated email app?
With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated email app on the market. What are you waiting for? Now you can access all your inboxes (Gmail, Outlook, AOL and more) in one place. Never delete an email again with 1000GB of free cloud storage.
.
|
