开云体育

I have only seen this happen on the "communication device" with VOICE command active for microphone activity. But I assume it may have similar capability on the speaker side. Also, some devices have

Hello Matthew, Which CM108-based device are you using? --David KI6ZHD

Are you talking about DINAH? If so, you need to cut jumper JP3.? It is mentioned in the second paragraph of the Overview section in https://kitsforhams.com/dinah and a couple times in

That is 'THE" most likely the cause and if you can disable the COS on the radio, it should solve the problem. However, I will add one additional comment.? With Windows 10 and even more so with

Hi Thomas, Of course, that makes total sense. This sound card has COS hooked up to VOL DN. I'd rather not modify the sound card but I should be able to disable the COS output on the radio. Thanks

Hi Matthew, This is a somewhat common issue when using C-Media CM-108/109/119 based USB sound fobs/dongles. Some of the instructions (especially those for Allstar Nodes) for using C-Media chips as

Hi all, I'm testing the 1.7A Beta Release on Windows 11 with a CM108 based sound card. For some reason when Dire Wolf receives , the output volume? of the CM108 reduces. On longer packets it reduces

Hello Roby, Leaving the AGW interface out of the discussion for a moment, once DIrewolf connects to the APRS-IS system, you need to then send it a PBEACON (Position Beacon) to let that system know

Hi all, I have compiled the latest Direwolf version for Linux and I would like to connect an APRS server and send the received data to the AGWPE interface where an APRSWeb server is connected.

Some documentation can be found here. https://github.com/jketterl/openwebrx/wiki/Configuration-guide Dire Wolf is mentioned as being used as the decoder for packet radio. It is not clear whether

1. I mean reporting to APRS-IS, I-Gate only. before uiview32, now direwolf with OpenWebRX. OpenWebRX is a web-based SDR receiver uses direwolf to decode APRS. -> http://openwebrx.de As far as I know,

You are not providing enough information for us to provide answers. You say "... I can't find out why my digipeater is not receiving packets. ..." a) Are you referring to your station is not decoding

Do you mean: 1. Report _from_ your station _to_ APRS-IS, or 2. Report _from_ APRS-IS to your Internet client? Where "your station" is UIView32 or Direwolf. I know from experience that I-gate software

Hi Andrew, but why does the station reports with uiview-32 sucessful, but with direwolf under openwebrx not? Alone because of the running time? I'm confused Original Message processed by david? Re:

Uh, are we back with the misunderstanding and false assumption that APRS-IS can be used for propagation analysis? Remember, the APRS-IS _always_ discards all but the first-received (by the APRS-IS

But the received traffic can be seen in the screenshot of the console in the previous post? Original Message processed by david? Re: Fw: Re-4: [direwolf] Reporting to aprs-is shows no digipeaters? 1.

Are you sure you have your sound card settings correct? Perhaps you have it set to an input you are not wired for? Have you also checked your cabling? Could be that you are not feeding AF to the

Hey all, New to Direwolf and APRS and for some reason I can't find out why my digipeater is not receiving packets. I am beaconing just fine and can see my position on aprs.fi (Callsign KE2ATV-10) and

I don't know what to say here other than aprs.fi is not showing any real heard traffic from your station. I would assume this is a levels issue with your SDR or an I/O issue between the SDR software

Nothing but mobile stations are reported to aprs-is. https://aprs.fi/info/a/DB0DAN Sry, but, what can I do?