开云体育

The TX light is on. I don't think RFI is the issue since the VM halfway works. There's just no audio at all when running directly through Linux. I just tried a different antenna for kicks but no dice.

Is the transceiver transmit light going on? If it is, but you are not getting a good transmit, make sure you are not suffering from RFI problems. MOve the system as far away from the transmit antenna

Hi all, I have no TX audio with Direwolf. I've verified what my card # is with aplay -l: *** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC283 Analog [ALC283 Analog]

In addition, the PTT seems to stay ON for an extended period of time. NOTE: there are no cables or anything connected to the PTT -> I removed them because the radio stayed in PTT.

I am trying to test some code which receives data from TCP/IP KISS and decodes it. I thought I used Direwolf before with pbeacon set as a source of data to decode. It seems Direwolf (neither 1.6 or

When receiving a Forward Error Correcting (FEC) mode, such as FX.25 or IL2P, the digit indicates the number of "symbols" (bytes) that were corrected. In this particular case, the "0000" means four of

Those are fx.25 decodes. You're seeing a forward error correction packet.

I have DW 1.6 on Raspberry Pi, I am seeing now numbers instead of bars is this Is new? WP3BM audio level = 7(3/2) __7100005 [0.5 21:23:33] WP3BM>KP4DOG-1:(I cmd, n(s)=1, n(r)=7, p=0, pid=0xf0)FF<0x0d>

The issue is in direwolf, not raspian (RaspberryPiOS).The issue appears to be with Cmake not producing the proper configuration.?? You don't have to start with a blank SD card.? Just go through the

Hello Rob, I wiped the sd card and tried again and now are up to the next step, when I put in make -j4, I get the following: make: *** No targets specified and no makefile found. Stop. I am copying

Looks to me like you are trying to use CMake from a different directory than you have the "build files" in.I think you missed the step of changing into the build folder. ??? cd ~ ?? ?git clone

Hello Group, I am trying to install direwolf on a raspberry Pi 3 with the latest version of the Raspberry Pi OS (full version) via putty. I am using the install instructions onthe Github

You can use netstat or ss to see connections. sudo netstat -antpu Herbert Crosby KD5PQJ

Hey folks, I looked through the manual but did not find anything. I know you can see which aprs2.net server you are connected when you first start Direwolf. But is there a command using command line I

You should not run Direwolf as root (sudo), but you do need to run the hardware interface routines as root (sudo) - as Greg D states. Rob KB8RCO

All, I have direwolf configured to receive data from APRS-IS, it appears that it connects to APRS-IS correctly, and I can see messages coming through in the terminal window, but none of the packets I

Might be something like that, or perhaps it's a stale link from a prior run? What are the permissions on /tmp? I've used these lines to run kissattach. sudo modprobe ax25 sudo kissattach `ls -l

That's a great idea Craig, but I'd need to dedicate a radio to that and I only have the one which I also use for FSQ locally (fldigi). And the answer is! Buy more radios!

Hi Andrew, This is how I have it at the moment so I'll keep it that way. Direwolf as the iGate operating independently. Thanks to all for the confirmation. 73 Danny

Thank you. The one thing I didn’t try. I just read an article about the /tmp directory that stated any active file that is locked in the directory can have detrimental effects on permissions to