开云体育

Try the -t argument. -t ( https://www.mankier.com/1/direwolf#-t ) n Text colors. ?0=disabled. 1=default. ?2,3,4,... alternatives. ?Use 9 to test compatibility with your terminal.

When using Direwolf for Raspberry PI version 1.3-2, apparently the most recent in the repositories for Stretch. Is there a way to changes the colors Direwolf uses? I have the termianl set for a white

Hello David, Thanks for the reply/answer and sorry for coming back so late. I did test some things over the past few days, so I got somewhat of a solution. You are right I am not using the build-in

Hi Patrick, Thanks for the help, jobs all sorted out now.. But I do have a question, I'm presuming this additional level of filtering, to give more flexability has been added since version 1.3 was the

I looked over your config file and I see the issue. By default, Direwolf only sends messages to individuals heard in the last 30 minutes. To change this, insert a line after your IGFILTER statement.It

Hi Patrick, Thankyou for the fast response, i've attached the conf file it's from my PI setup. As far as i can see the igate is being pointed at my TX Channel 0 and Channel 0 does transmit both my

Hello Paul,The line with [Ig>tx] should be followed by a line beginning with [channel number] in magenta colored text. If you do not see that, your IG to TX is not configured or the data is being

Hi All, I'm hoping that someone could kindly shine a light on a daft problem I have... I'm sure the problem is a config error but I simply can't see it myself at the? present time. I've been running

Hello Hans, First, I assume you're NOT using the built-in AX.25 TNC in your TS2000 and instead, you're only using Direwolf. Correct? You cannot use both at the same time. Next, what are you using as

My setup: 5 element 2m X-pol yagi --> TS-2000 --> Behringer USB audio interface --> Direwolf --> UISS I made some QSOs with this setup through the ISS APRS repeater, so my setup is working - sort of.

Rather than use crontab to try to keep a process running (which it isn't really designed to do, but as proven here can be coerced into it), you may wish to use the systemd service that the

David, Mike I know Gary, PiGate RMS v2 and linbpq well. I also have this working with PiGate and PiGate RMS which uses linbpq rather than Paclink-Unix. I am just working on it for our club. I also

Hello Mike, I spent some time with Gary VE7POP and we were able to successfully get PiGate to work with using Direwolf on a Raspberry Pi. The technical details was passed on to Mark Griffith (creator

The originating stations are from all over the world.? the problem is the tier2 aprsis servers sending me these "message type" bulletin packets to targets outside of my range filter.? The addressee

Have you considered blacklisting the originating station of those bulletins? After all, the APRS-IS servers are not the source of all that spam, so you might see that from all APRS-IS servers. Or is

Yes, "LinuxRMS" combined with direwolf/ax.25 on a Raspberry Pi becomes a Winlink RMS gateway on VHF/UHF. Be advised, LinuxRMS is non-trivial to install, but doable, Winlink demo of DigiPi at 14:00:

Km4ack build a pi is perfect for winlink express station. His is called PAT winlink Mine is running perfect A few hickups with downloading forms at this stage. But you can send and receive It supports

Does it support acting as a RMS Gateway, Craig? (Fair warning, I'm fairly new to Winlink) Mike

Compact?? low power?? Raspberry Pi? ? Winlink? I can shamelessly self promote a */DigiPi/*? that does all this and more, many instances in the field now. ?? http://craiger.org/patreon/ Always

We are redoing our club's Winlink 2m gateway at the tower. Original set up was a Windows PC and a KPC3, but we are wanting to switch to something much more compact. I have come across the PiGate