开云体育

I have direwolf set up as an IGate and using the Pseudo Kiss or AGW setup on my APRSIS-32, Data is being sent to APRSIS-32 and can see all the stations my Rx only IGate is picking up. I have 2 issues:

Hi David, Thanks for the RTLSDR-Airband info. I will play with it. Maybe there is an easy way to interface it with Direwolf. I have play before with other RTL-SDR software like aisdeco to decode ship

The APRS-IS servers remove duplicates. If multiple IGate stations submit the same packet, only the first one is retained. If some other station sent the same information a millisecond sooner, the

Hello Jose, The rtl_fm tool only allows demodulating one frequency at a time but I recently came to learn of https://github.com/szpajder/RTLSDR-Airband . This software can support 8 "slices" per SDR

I installed Direwolf on a Raspberry Pi with RTL-SDR and can decode APRS packets OK with the command: rtl_fm -f 144.39M - | direwolf -c sdr.conf -t 0 -r 24000 -D 1 - Is it possible to have a dual

Keith, I put it on another device earlier (o2 Joggler) not sure if anyone has used one of these but thought it would be useful as I can put a map on the screen. I feel a bit of an idiot here as a

Hi Dale, It says 1.3 when it loads, no mention of beta. 73 Keith G6NHU.

Not sure which ‘Keith’ your asking. But I am currently running 1.4 but have not spent enough time with it for a full evaluation. —Keith, WA0TJT

Keith, What version of Direwolf are you using, is it 1.3 or 1.3 Beta? My friend has just set a Pi up and his is working correctly, however he used plain 1.3 So not sure if something is broken in the

I removed the digipeat line from my sdr.conf file as it has been suggested that for an RX only iGate, it's not needed. Checking today, still only my beacons have been forwarded onto the internet. 73

Arnold, Did you ever find out what your problem is/was? I am having a very similar issue. I am setting up an Igate and Direwolf will not decode any packets. I would go into detail, but I don't want to

That seems like a lot of effort just to eliminate a few seconds of digipeater latency, but to each his own. -- Kenneth Finnegan, W6KWF http://blog.thelifeofkenneth.com/

Correct but if you waited a couple hundred milliseconds the RX would have started by then. If the packet duplicate check was done after the clear channel detection then you would weed out digipeated

IGTXVIA 0 didn't disable anything. Keith, if you look at your Raw data on aprs.fi do you see anything other than your Beacons now? I still don't see anything other than beacons on mine after changing

I did see a few [IG>TX] in the console so I just added: IGTXVIA 0 to sdr.conf.

Maybe not but I'm certainly seeing more magenta lines flashing up my screen now. With hindsight, maybe not as much as I'd expect so perhaps it's not quite the correct way to do it. Hopefully someone

From what I understand that isn't needed on a Rx only IGate?

I'm replying to myself now because I think I've resolved this. In sdr. conf, I added a line: DIGIPEAT 0 ig ^WIDE[3-7]-[1-7]$ ^WIDE[12]-[12]$ ... and it now looks as though I'm relaying stuff from

Hi Keith, I just fired up APRSIS32 on my windows machine and connected to Direwolf on my Pi using port 8001, all the decodes are showing fine on there too. I just hit "Transmit" on APRSIS32 and I saw

I've just done exactly the same thing today and am seeing the same thing - I'm receiving plenty of stations which are being decoded and shown in green or blue but only my own beacon shows magenta and