开云体育

Per the user guide, you want your average reported report level to be around 50. You'll see a lot of different levels out there from mistuned packet stations so just try your best. Direwolf will tell

Hi Dave, well, putting the J2 jumper in place on the Signalink has boosted the receive audio. I now see Direwolf report audio levels in the 20s (typically) with the RX knob midrange setting, whereas

Good Morning John.. Well, I can't speak specifically to the SIgnalink but some sound card drivers can have different gain levels. Here is one URL that talks about what might be happening when

Hi David, thanks for your reply, I have included some responses with the original text. 73, John, NX2I [direwolf_packet] <direwolf_packet@...> wrote:

Howdy, The group is doing well, with over 450 members. As the list owner, I need to speak with the author of Direwolf about an important matter. Please eMail: n5pvl@... 73 DE Charles, N5PVL

Hello Jose, Have you read https://github.com/wb2osz/direwolf/blob/dev/doc/Raspberry-Pi-SDR-IGate.pdf ? --David

I am running successfully an RPi Direwolf SDR APRS Rx-only Igate on VHF on 144.390Mhz. If I want to add a second SDR dongle for UHF on 445.925Mhz. on the the same RPi for Rx-only Igate. How do I set

Hello John, Agreed! Well, every OS is different in it's mixer settings. What radio are you using and how is the Signalink connected to that radio? I assume the RX knob on the front of the Signalink is

Please excuse me if this topic has been dealt with before, but my quick search did not give me the info I think I need. I am setting up a RPi 3 -based IGate with a Signalink audio codec. The command

Great news. It's working! I installed the Gnome Alsa Mixer as suggested by Patrick. I had to check the "Record" box and the audio level jumped up. I adjusted the audio level (was way too high) and it

I loaded the Gnome ALSA mixer on my Pi, as I'm more comfortable with a GUI. Some of the input sliders have a check box marked "Rec." (Record). Perhaps that is cause of your issue.?Patrick (N3TSZ) To:

Odroid-c2 is readily available and not too picky about SD card..... Get Outlook for Android<https://aka.ms/ghei36> ________________________________ Sent: Saturday, February 4, 2017 2:38:25 PM To:

ive seen Davids messages like that many times, i thought he was just being friendly :) and have seen others pop up that way as well

picky about sd cards or not neither of the ones i have ever put out anything on the HDMI port monitor says "no signal" tried many different power supplies as i had read they were pick about that as

David, Okay. We're not there yet, but we're getting somewhere. I removed the dash from the ADEVICE line and now the terminal indicates "Audio device for both receive and transmit: plughw:1,0 (channel

I'm responding to my own post for an update.... This is a portable telemetry system, so ended up getting recommended GPS unit. So, now implement TBEACON with compressed location using COMMENTCMD.

I gather there are a lot of QA issues with these also they are very picky with memory cards. I used a 32GB class 10 Integral brand with mine. I just wanted to try something different to a Pi! 73 Nick.

Hi Dan, I discovered that the GPIO pins are not the same as the Pi and have to be defined in a FEX file. I do have the GPIO working now by creating 4 GPIO ports then using GPIO3 for PTT on pin22 and

Hello! I am interested too in GPIO settings for Orange PI (One, Lite) for working with PTT, SQUELCH, but my Linux programing skill are at low level... Please share your progress about this issue.

Hello Randy, Yeah.. sorry about thast. I think there is something wrong with the new K9 Email reader for Android. Nice work about thinking to looking at the HTML source to see the plain text email!