开云体育

Hello Darryl, Got it. Ok. When you say "chat", what program is this? Is this something AX25 enabled that comes in HamPi?

Darrell, Since you are using the 5.10.11 kernel, stop pulseaudio to see if that frees up direwolf from being busy. sudo systemctl --system stop pulseaudio sudo systemctl --system disable pulseaudio

OK thanks for the reply, I am running Raspbian GNU/Linux 10 \n \l?with Linux 5.10.11-v7+ armv7l What I know so far, I started with HAMPI because it had other software that my club wanted. I installed

Hello Darryl, I've been doing some noodling around your "netstat -A ax25 -an" output issue and I was reminded by DL9DAU that this is a known kernel bug (I remember the issue slightly differently). The

Curious, what Linux distribution and kernel version are you using? --David KI6ZHD

Yes, these are all stations that have popped mail using PAT as this PI also has linbpq running on it. It is using w8lrk-10 and LARK not w8lrk-5 or LRK....

That doesn't look right. Why are all these remote callsigns listed if they aren't connected. Do you know if these were stations that previously connected to your station? Techically speaking, you

Active AX.25 sockets Dest? ? ? ?Source? ? ?Device? State? ? ? ? Vr/Vs? ? Send-Q? Recv-Q W8MSP-0? ? W8LRK-10? ?ax0? ? ?LISTENING? ? 000/000? 0? ? ? ?0 KE8QQQ-0?

All, my club is lucky enough to have Steve N8AR as a member. He is the designer for the SHARI and the DINAH. We recently asked him to produce a more convenient sound card for our club packet project.

WOW, I go to work and come back to a bunch of help. Thank you everyone for answering. Yes if I use the callsign it works fine, just not with the alias Yes PAT is using the AX25 stack Yes, If I replace

Thanks for the update here Michael and we really need to pin your post on Groups.IO. Why? There are many users trying to setup packet stations with Baofeng and other too-cheap radios due to new /

CORRECTION - I swaped out the Baofeng UV-5R for a 21 year old Kenwood *HT* NOT a TNC

Today I successfully connected to my local 1200 baud, packet Remote Message Server about 10 times and was able to both send and receive email messages. What allowed me to do this was to swap out the

The challenge here is that PAT uses the Linux AX.25 stack. I don't see how this would be a PAT bug. --David KI6ZHD

I think you already answered this question at the beginning: If I digi from w8dsb via w8lrk-5 to another station then P2P works. If I digi from w8dsb via LRK to another station it does not work for

The fundamental problem here is that the originating station does not seem to be processing the UA frame as expected. This starts out good. The originating station specifies the "LRK" alias for the

Why not just use Direwolf's built up n digipeating?

Hello Darryl, I had written the following reply but then I replied to your second email as I thought it might be a misconfiguration. Anyway.. I held on to this email instead of deleting it and I'm

Just curious, does it (P2P) work if you don't use the alias but the actual call-ssid?? W8LRK-5? Robert Giuliano KB8RCO

Thanks David for the reply. This setup is the digipeater at the repeater site not my station. My call w8dsb Tower call w8lrk If I digi from w8dsb via w8lrk-5 to another station then P2P works If I