开云体育

The connection to aprs.fi doesn't exist.? You connect to the APRS-IS system, and aprs-fi is just a web based client that shows data that was sent to APRS-IS. If you are trying to run an APRS client

Hi Robert, I have configured Direwolf in the past to use Bluetooth-Kiss-TNC using APRSDroid, what i would like to do is connect using APRS.FI on a iOS device. I have gotten the TNC to work over TCP

I know that Direwolf can be configured to send data to a serial KISS TNC.The manual (V1.6 page 12) says:?? "KISS Interface (TCP/IP, serial port, Bluetooth)."It references another manual called

Does anyone know if Direwolf supports kiss over BLE or if it's in development? Thanks,

Thanks Rob, that sounds like my next project!? :-)

Anyone that's been around for a while remembers the iMic, basically a USB audio interface or if you wish USB sound card. I have direwolf running on my M1 MacBook Air with a SignaLink USB but would

Very nice! You could use the internal Direwolf script capability to alter/add a comment and send the "opening announcement" over the air. Even better would be to use the script to determine if the

Variation on a theme, I decided my first foray into trying to write a script should be Direwolf related - apart from some C++ at university and Excel macros I've not coded anything. I installed

And disregard my disregard. After loading 2.0.0 Alpha, I get the same result.

Disregard. I realized I installed version 1.0.1 and not 2.0.0 alpha.

Tim, I followed your instructions and when I try to view my igate on port 8080 in a browser, it gives my a "connection closed" message. Any ideas? Thanks, Paul KK7BIZ

David, I've reviewed the user guide regarding digipeating. I see where my digipeater may not repeat packets as a stronger digipeater may win out. However, I have my HT set at low power and when it

Thanks to all. I have managed to get it working by buying a different USB sound card from Amazon. The new one identifies as 'USB Audio Device' for receive and transmit, rather than separately named

Hello Fred, How are you judging that it's not digipeating? Because you don't see the Direwolf setup transmit or because you don't see your digipeater being the relay station according to aprs.fi? If

Hello Everyone, I just built a standalone digipeater running Direwolf. The digipeater is beaconing just fine as I'm able to verify the beacons on aprs.fi. However, it is not digipeating. I have tested

Oh! That's different. You would have to send an Object message (not a self position beacon) that is precisely formatted to be compatible with the Kenwood's built-in TNC.

Luc, You want to configure YOUR direwolf to send the correct APRS packet so that OTHER PEOPLE with Kenwood radios can use the Tune button to QSY to your repeater, yes? To: "direwolf"

Okay, thanks, I'll butt out then. [email protected]> wrote:

Hello Luc, The D710's "tune" button is on the control head so when the APRS system running on VFO-A decodes a specific APRS beacon packet and you press the "tune" button, the radio can QSY VFO-B to

Hello everyone, Wow, you said several things OK, if I understood correctly at the level of the repeater where my Rasperry is located with Direwolf I must have a Kenwood radio to connect with my