开云体育

Or if you already have RT Systems software for either the TM-D10A or TM-V71A, you can use the USB-K5D Programming Cable. Danny, K5CG user of YAAC :) To: "direwolf" <[email protected]> Sent: Sunday,

YAAC's repeaterfinder plugin has the logic to parse APRS repeater objects and send the commands to tune a Kenwood radio as well. You need the Kenwood PG-5H cable to the transceiver body to send the

Hi Luc, The Tune function is a feature of the TM-D710 and some other radios whereby you can have the non data-band side of the radio QSY to the frequency advertised in an APRS packet, but only IF the

I took a look at the referenced PDF.? We have had Stephen (WA8LMF) give talks at club meetings. He makes a lot of good information available to the HAM community. And it has been my experience that

Hello everyone, this morning during our amateur radio lunch there is one of my members, who asked me a question about DIREWOLF it works with a Kenwood TH-D710 radio and he tells me that he has a

The block diagram is a bit harder to follow for me, and I found it after I looked at the PDF. The schematic in the PDF is much easier to follow. The input audio is amplified by the first half of the

Rob and Sid, I think all of the op-amp circuit is not present. The gist as I see it is the audio is amplified, rectified to dc, which charges the capacitors for a hang time into the second half of the

Thanks for responding, Rob.? Yes, as I understand it and hope, the circuit is meant to activate the PTT while it's sending APRS data, like VOX.? The designer (see link below in the thread)?claims

In theory, that is the purpose of the 4N25 optoisolator.? However, in practice, the sound card is not differential, so it really isn't isolated. As for the rest, I am not sure what you are trying to

thank you David that works just fine took me a bit to gather that the command actually needs to be in 2 places not sure why that is, maybe a definition? and then a execution but it works great I

Thanks for the info. I did do a Google in it and see it was an upgrade card for TNC-X’s. Looks like a nifty decide actually, (if it weren’t TX’ing every 30 seconds a bad packet): it’s not that

Hello N8JLK, Which of your APRS stations shown on APRS.FI is hearing this “X-Digi”/ “CDM AL” station? Looking on say https://aprs.fi/?c=raw&call=N8JLK-7 (raw view), it's not showing it.

Thanks very much for the help, Rob and Gil.? It's making more sense now.? I changed the circuit to this: (from http://wa8lmf.net/miscinfo/Tone-Keyed_Soundcard_Interface.PDF schematic, page 6) I

Forgot to comment on the final part: The starting point would be to point out the issue with the space in the "sender" section. Then as making suggestions, bring up the rapid rate. ------- Rob KB8RCO

I can help with part of this.X-Digi is by John Hanson of TNC-X. The X-Digi was an addon board that allowed the TNC to be a stand alone DIGI.MFJ now sells the MFJ1270 and the x-digi addon board from

Someone it seems must’ve put together some “X-Digi” device that is sending out a junk packet ever 30 seconds. The “sender” is “CDM AL”, whatever that means, and of course DireWolf hates

Hello k9wkj, Sorry for the delay but I've been researching your issue and needed to setup an RTL SDR to do actual testing. During that testing, I remember this issue was brought up some time ago:

Thanks David, that worked well. 73 Ian ZL1VFO

That isn't what I was describing.I am describing a remote receive "DIGI".? It will only DIGI signals that "qualify" - no different than having the audio coming from the "local radio", but the audio

David, the stream bandwidth is not a issue as I said this is all inside our own network, with big fat pipes we run 5.8Ghz wifi links to all our sites with even 30 mile links at upwards of 100Mbs no