Hi,
You are using a USB dongle for audio?
So you have the proper:
¡°ADEVICE plughw:1,0¡± line?
Actually, the ¡°1¡± will depend which USB port it¡¯s recognized on.
From the CLI, do a ¡°$ aplay -l¡± to see what port the speaker is on, followed by a ¡°$ arecord -l¡± to see what port the mic is on. ?They will likely be on the same. ?Say if they are on 2, then add this to direwolf.conf
¡°ADEVICE plughw:2,0¡±
Don¡¯t forget to save, kill any DireWolf processes running ¡°$ killall direwolf¡± then restart using your .conf by ¡°$ direwolf -c direwolf.conf¡±
toggle quoted message
Show quoted text
On Nov 21, 2022, at 3:50 PM, Fred Bouwman <bouwmanf@...> wrote:
?On Mon, Nov 21, 2022 at 05:00 AM, J K wrote:
I added "PTT /dev/ttyUSB0 RTS DTR¡± and that resolved the will not transmit issue. Thank you. However, the signal it is transmitting is not the "squawck" sound of an APRS signal but a hum. I will start a new topic for that. Thank you all for your help it is greatly appreciated.?
