I do not see where to adjust TX or RX tails. There are settings for Squelch Tail Eliminate (HT to HT)(enabled or not), Squelch Tail eliminate (repeater) (OFF, 1-10) and STE Repeater delay (OFF, 100ms -1000ms, 100 ms increments). At the moment STE/HT-HT is enabled, STE repeater is? 5 ans STE Repeater delay is off.
To be clear... the UV5R(VOX)/usb sound card WILL beacon and is received by other APRS nodes (well, mine across the room). It does hear stations and will attempt to digipeat a strong enough signal. The repeater across town is being heard with an audio level of 8 and is not being digipeated. My handheld has a level of 75-80 and digipeating is attempted.
When digipeating is attempted, a signal is recieved (seen in direwolf) the radio keys and all I hear is a buzz. Also a message is generated : Digipeater: Drop redundant packet to channel 0.
As an aside, I am trying to set up a KPC3 to digipeat APRS and I just got an Easy Digi kit (ANY soldering is an adventure for me).
