I got it to work. ?I can¡¯t push the audio cable fully in the FT60R. ?I have to pull it back out s little then it works.
13 Pro Max
toggle quoted message
Show quoted text
On Jun 10, 2022, at 5:31 PM, David Ranch <direwolf-groupsio@...> wrote:
?
There is a schematic posted here (bottom image on
the right):
??
To me, it seems like your Direwolf configuration using "DTR RTS"
should work.? Are you *sure* that /dev/ttyUSB0 is the correct
device for this blue USB to serial port cable?
--David
KI6ZHD
On 06/10/2022 02:26 PM, J K via
groups.io wrote:
It¡¯s an EasyDigi with USB PTT cable.
13 Pro Max
On Jun 10, 2022, at 5:16 PM, Martin
Cooper via groups.io <kd6yam@...>
wrote:
?
You
didn't say how you're connecting between the Easy Digi
and the FT-60R. Whatever cable you're using needs to be
carrying the PTT signal to the radio, in addition to the
audio signal.
Martin.
KD6YAM
Hi,
Is anyone else using a FT60R and EasyDigi? I just
received one.?It
receives well, but can¡¯t get it to TX. I¡¯m using a
Raspberry Pi running DireWolf. I know the audio is
getting out of the sound device because if I plug
in a set of headphones, I can hear the burst. I¡¯m
thinking it must by the PTT (?). In direwolf.conf,
I have the following line for PTT:
PTT
/dev/ttyUSB0 RTS DTR
This
is exactly what I used with the K2-2pin EasyDigi
with USB and it worked great. I tried every
variation of RTS, -RTS, DTR, -DTR also and nothing
worked.? Ie, i tried:
PTT
/dev/USB0 RTS DTR
PTT
/dev/USB0 -RTS DTR
PTT
/dev/USB0 RTS -DTR
PTT
/dev/USB0 -RTS -DTR
Any
help would be most appreciated.
Thanks!
13 Pro Max
