I'll jump over there and see what I can get figured out.
I have the radio connected via USB to a via a ?which provides CAT control via a serial port and sound via a 10-pin mini-DIN to 6-pin Mini-DIN. The 6 pin is plugged into the
I am able to see Direwolf decode what the radio receives, now I need to get PTT working to verify I have the correct outgoing or microphone port.
Currently my PTT configuration(s) only lock the radio in transmit when Direwolf is run.
#PTT COM1 RTS
#PTT COM1 RTS -DTR
PTT /dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_00F8CEC3-if01-port0 DTR
#PTT RIG 1022 /dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_00F8CEC3-if01-port0 19200
I have another SCU-17 on my FT-857D on the same computer, it is controlled via FLRig and it shows the following working configuration...
