Hi,
I finally figured the issue with the install (updated commands are helpful) but when running direwolf I get the following errors.?
My set up is a baofeng UV5R+, RTL-SDR receiver R820T2, raspberry pi 3B+. Thank you for any help, yes I am new to this. The bold are the red error lines
Dire Wolf version 1.6
Includes optional support for:? cm108-ptt
ERROR - Could not open config file sdr.conf
Try using -c command line option for alternate location.
Audio input device for receive: ¨C? (channel 0)
Audio out device for transmit: default? (channel 0)
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM ¨C
Could not open audio device ¨C for input
No such file or directory
Pointless to continue without audio device.
Found 1 device(s):
? 0:? Realtek, RTL2838UHIDIR, SN: 00000001
?
Using device 0: Generic RTL2832U OEM
Detached kernel driver
Found Rafael Micro R820T tuner
Tuner gain set to automatic.
Tuned to 144642000 Hz.
Oversampling input by: 42x.
Oversampling output by: 1x.
Buffer size: 8.13ms
Exact sample rate is: 1008000.009613 Hz
r82xx_write: i2c wr failed=-9 reg=12 len=1
r82xx_set_freq: failed=-9
Sampling at 1008000 S/s.
Output at 24000 Hz.
Signal caught, exiting!
?
User cancel, exiting...
Reattached kernel driver
pi@raspberrypi:~/direwolf $
