Presuming that we are talking about the
F6GDL object being transmitted by F6IKY-2, examination of the raw
packets shows that there is not even a PHG term being
transmitted.? It is no wonder that the aprs.fi station information
doesn't reflect the power that is being discussed here.
WinMain:2022-01-05T19:28:33.634 F6IKY-2>APU25N,TCPIP*,qAC,T2NUERNBG:;F6GDL *090904z4632.27N/00502.02E-Roland - La Genete
WinMain:2022-01-05T19:28:33.685 F6IKY-2>APFD71,TCPIP*,qAC,T2NUERNBG:;F6GDL *090904z4632.27N/00502.02E-Roland - La Genete
aprs.fi will continue to show the most
recent PHG information that it has received for a station,
regardless of how long ago that information was received.? But the
current packets are NOT specifying any new PHG information.
I further don't understand why these
objects are being transmitted by both a UI-View instance
(>APU25N) and a Direwolf instance (>APFD71)?
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 1/5/2022 1:13 PM, F6GDL wrote:
ma question était pourtant simple au départ mais nous ne nous
comprenons pas. Problème de traduction peut-être.
Les réponses sont toujours un peu à coté de la question. j'ai
utilisé ce calculateur et d'autres? !!!
Pour une puissance de 15 w, il faut indiquer 3 dans "power" ?
et 10M pour la hauteur =? 2 dans Direwolf ?
mais sur aprs.fi, ?a ne donne pas les bonnes indications. Ce
que je ne comprends pas aussi, c'est pourquoi on obtient 4
chiffres alors qu'il n'y a que trois paramètres à indiquer dans
Direwolf.
Désolé, tout le monde n'a pas votre expérience.
Le 05/01/2022 à 18:49, Don Rolph a
écrit?:
F6GDL:
Lynn's site allows you to calculate the values for phg.
The format for the direwolf.conf line for a pbeacon?is:
PBEACON delay=11 every=4 overlay=S symbol="digi" lat=42^08.85N long=071^13.61W power=1 height=20 gain=1 comment="East Walpole MA"
So use Lynn's calculator to get the values and then put those values in on the PBEACON line. They should also work on the TBEACON line but I have not tried.
On Wed, Jan 5, 2022 at 11:15
AM Lynn Deffenbaugh <
kj4erj@...>
wrote:
says PHG3200/ assuming a 0dB gain antenna.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows
Mobile and Win32
On 1/5/2022 10:53 AM, F6GDL wrote:
Hello everyone,
With Direwolf 1.7 on my raspberry, I cannot find
the correct settings for "PHG". The "" site does not
give me the right information.
I have 15 W, an antenna 10m from the ground and
it is omnydirectional. What do you think should be
put?
thank you
--
--
