This gave me some clues.? Essentially I did not have my ADEVICE set up properly.? Using "arecord -l" command showed me the USB Codec was on Card 2 instead of 1.? After setting my ADEVICE properly, the audio was passing for transmit and receive.? I also found that previously when I thought I was transmitting, I was just transmitting blank air.? It was keyying my transmitter, but not sending any APRS codes.? Hopefully this helps someone else in the future.?
Thanks for the support! 73?
Below are my options that worked.
#ADEVICE plughw:1,0
ADEVICE plughw:2,0
ACHANNELS 1
CHANNEL 0
MYCALL KI5SBM
MODEM 1200
PTT RIG 370 /dev/ttyUSB1
AGWPORT 8000
KISSPORT 8001
