Re: How to use Direwolf with multiple clients and multiple radios?
|
The key to connecting to 2 different radios is having 2 different mic (line in) inputs. That means either: ?? a) Stereo mic or line in ?? b) Two sepearte sound cards. With Direwolf 1.7, you cxan assign separate KISS over TCP/IP ports to each audio channel, so it is very easy to connect each application separately.
Example: If using 2 separate sound cards, . ??? ADEVICE plughw:2,0 ?? ACHANNELS 1 ??? ADEVICE1 plughw:3,0
??? ACHANNELS 1??? CHANNEL 0
?? ?MYCALL K0CAL-1 ??? CHANNEL 2
?? ?MYCALL K0CAL-2 ??? AGWPORT 8011 1
Color coded to match settings with devices.
So, APRS could connect to KISS port 8001 or AGW port 8011 (Yellow)
?? and WINLINK to KISS port 8002or AGW port 8012? (Blue)
On Sunday, November 14, 2021, 06:15:05 PM EST, Douglas Pervine <douglas.pervine@...> wrote:
I've been using DW for some time now configured with a single channel and a single radio.? If I want to switch between APRS and WINLINK, I have to quit that application and change my radio frequency.
I would like to build/configure DW to have multiple channels with multiple radios attached, but operate independently.? I don't want APRS beacons to go out all channels and the same for WINLINK sessions.
How do I configure DW for such operation?
More importantly, how do I tell the client applications to use certain ports?
(I'm using DW 1.7b on a RPi 4 with a 7" LCD touch display.? Device 1 is an Alinco RIM-9600 and Device 2 is an Audio Injector Zero)
Any assistance would be greatly appreciated!
--73 de N1OBU
|
