Run direwolf as root, that's the only workaround I've found.?? Not
ideal.
-craig
KM6LYW
On 10/15/21 6:26 AM, Mike Lussier -
AE4ML wrote:
toggle quoted message
Show quoted text
?
I setup a new pi with a new SD card to run pat . I setup
direwolf and started it with direwolf -p?
Then I started kissattach only to get a permissions error
that I can't resolve.?
if I go with the idea of using /dev/pts from below then I
have to modify the statement every time I run the Pi. It was
suggested in an earlier message that you must be in the dialout
group. That didn't work either.?
?
Any other suggestions?
?
pi@pat-winlink:~ $ direwolf -p
Dire Wolf DEVELOPMENT version 1.7 A (Oct 13 2021)
Includes optional support for:? cm108-ptt
?
Reading config file direwolf.conf
Audio device for both receive and transmit: plughw:1,0?
(channel 0)
Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100
sample rate / 3.
Using /dev/hidraw0 GPIO 3 for channel 0 PTT control.
Ready to accept AGW client application 0 on port 8000 ...
Ready to accept KISS TCP client application 0 on port 8001
...
Virtual KISS TNC is available on /dev/pts/0
Created symlink /tmp/kisstnc -> /dev/pts/0
?
?
pi@pat-winlink:~ $ sudo /usr/sbin/kissattach /tmp/kisstnc
wl2k
kissattach: /tmp/kisstnc: open: Permission denied
?
pi@pat-winlink:~ $ groups
pi adm tty dialout cdrom sudo audio video plugdev games users
input netdev lpadmin gpio i2c spi
?
