Roger, all,
I know it's not on a RPi but for my Buster desktop, selecting git-all marks a disturbing number of packages for removal. Not insignificant are lightdm, network manager, network-manager-gnome, systemd-sysv, task-xfce-desktop, and numerous desktop tools that may/may not be on YOUR required list. Perhaps some of those don't apply for the RPi but from memory, lightdm is used as the desktop manager and you wouldn't want it missing in action :) I have previously compiled Direwolf on both model B and RPi4 using just the basic git as the basis for the process.
Given that the git package - apt install git - is all that is required to handle git for Direwolf (and every other git based programs I've used) I suggest you remove and purge git-all, and install git. Naturally there are a few other dependencies? such as cmake, et al, but cmake probably marks those for you for installation.
Regards
Ray vk2tv
toggle quoted message
Show quoted text
On 19/9/21 10:17 am, Roger wrote:
David:
hello, Thank you for responding.? Yes, exactly.? I burn a new micro-SD card with Raspbian OS10, run through the set up & reboot, no problem. Then remove pulseaudio & reboot, no problem. Then run the command sudo apt install git-all and reboot and the Desktop GUI disappears. Then, going through the raspi-config set-up for boot into GUI does no good. I've done this 6-times sequentially, with new cards and two different RPis thinking I miss-keyed or some other goof.? A friend tried it with different cards, different RPi, different network and the results were the same. Desktop GUI disappears and no way to bring it back.
I will try sudo apt install git to see if it works.
Thank you
Regards;
Roger, N1XP
On 9/18/21 1:01 PM, David Ranch wrote:
Are you saying that if you start with a stock Raspberry Pi OS image with the desktop which works as expected, one you install git, the desktop UI crashes and no longer works?!? I don't see how that's possible though I would also say just use "sudo apt install git" and not use the "git-all" meta package that is probably bringing in a lot of other packages you don't need.
--David
KI6ZHD
On 09/18/2021 09:52 AM, Roger wrote:
The problem isn't really with Direwolf--?? When I install git? (sudo apt install git-all) the RPI Desktop GUI is lost after reboot. Re-configuring the raspi-config settings do not restart the desktop.? Any suggestions on a different method of compiling on RPi without loosing the desktop?
Roger, N1XP
