Correction to below
IGFILTER m/10 t/po
sends ALL packets and objects. Direwolf config suggests only the m/ parameter should do this.
73
Nick
toggle quoted message
Show quoted text
On 22/02/2017 14:57, 'Nick B.' nick@... [direwolf_packet] wrote:
This should be possible with the IGFILTER config parameter. Just choose
what traffic you want from APRS-IS as per
IGFILTER m/10 t/po
Would send traffic within a 10km radius of my position and only position
packets and objects. Tune accordingly for your requirements.
HTH
Nick G4IRX.
On 22/02/2017 08:07, Matt Maguire matt.vk2rq@... [direwolf_packet]
wrote:
What q-construct are you tagging the APRS packets with? Is it qAR?
This would imply to APRS-IS that you are a TX I-gate. If you use qAO
instead, this should tell APRS-IS that you are RX-only. Not sure if
that would solve the problem. Also not sure if direwolf APRS-IS client
lets you specify the q construct. if not, you can run another client
on top of Direwolf modem, eg. APRSIS32. But if the confit option is
missing in direwolf APRS-IS client, someone should probably add it.
73, Matt VK2RQ
------------------------------------------------------------------------
*From:* direwolf_packet@...
<direwolf_packet@...> on behalf of Max Harper
kg4pid@... [direwolf_packet] <direwolf_packet@...>
*Sent:* Wednesday, February 22, 2017 6:48:44 PM
*To:* direwolf_packet@...
*Subject:* Re: [direwolf_packet] IGFILTER in Rx only iGate
While I agree with you, we are not given any control over that. While
my station is not receive only, the other day there was a short band
opening and I received a single packet from a distant station 400
miles away via RF, and for the next three hours I received their once
per minute weather station packets. I counted all 180 of them. Seems
like a lot of wasted bandwidth. Not to mention it fills up my logs
with useless data. See if you can spot both problems!
Max KG4PID
------------------------------------------------------------------------
*From:* "kq6di@... [direwolf_packet]"
<direwolf_packet@...>
*To:* direwolf packet <direwolf_packet@...>
*Sent:* Wednesday, February 22, 2017 12:05 AM
*Subject:* [direwolf_packet] IGFILTER in Rx only iGate
I have a Receive Only iGate. The T2 servers keep sending my iGate
packets they think are going to go to RF. Obviously they don't, but
what is the way to stop getting iGate messages for transmit?
IGFILTER no send ???
IGFILTER -everything ???
There must be a way that I haven't found because I get about 20
messages an hour that it wants to send.
Arnold
KQ6DI
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
Nick G4IRX