Appreciate the response.
I don't really have a good option for the frequency on this unlocked ht.? So I turned the output to low and removed the antenna.? It did change the errors.
Now sitting on the following error while trying YAAC? "
ioctl HIDIOCGRAWINFO failed for /dev/hidraw2. errno = 22.
Write to /dev/hidraw2 failed, n=-1, errno=22
ERROR: ?PTT for channel 0 has failed. ?See User Guide for troubleshooting tips.
"? ?
?
HOWEVER, when direwolf fires up, everything "just works" until it has to do the work.??Full happy direwolf text "
Dire Wolf version 1.7
Includes optional support for: ?hamlib cm108-ptt dns-sd
Reading config file /home/pi/.direwolf.conf
Audio device for both receive and transmit: plughw:3,0 ?(channel 0)
Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate.
Using /dev/hidraw2 GPIO 3 for channel 0 PTT control.
Ready to accept AGW client application 0 on port 8000 ...
Ready to accept KISS TCP client application 0 on port 8001 ...
DNS-SD: Avahi: Announcing KISS TCP on port 8001 as 'Dire Wolf on sbitx'
DNS-SD: Avahi: Service 'Dire Wolf on sbitx' successfully registered.
"
I tried the silent ptt test, but the light on the digirig light failed to come on, which points toward a hardware interface issue as far as I'm aware.? "
pi@sbitx:~ $ direwolf -c ~/.direwolf.conf -x p
Dire Wolf version 1.7
Includes optional support for: ?hamlib cm108-ptt dns-sd
Reading config file /home/pi/.direwolf.conf
Audio device for both receive and transmit: plughw:3,0 ?(channel 0)
Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate.
Using /dev/hidraw2 GPIO 3 for channel 0 PTT control.
ioctl HIDIOCGRAWINFO failed for /dev/hidraw2. errno = 6.
Write to /dev/hidraw2 failed, n=-1, errno=22
ERROR: ?PTT for channel 0 has failed. ?See User Guide for troubleshooting tips.
Sending silence (Set PTT only) on channel 0.
Press control-C to terminate.
^C
QRT
ioctl HIDIOCGRAWINFO failed for /dev/hidraw2. errno = 22.
Write to /dev/hidraw2 failed, n=-1, errno=22
ERROR: ?PTT for channel 0 has failed. ?See User Guide for troubleshooting tips.
pi@sbitx:~ $?
"
If I'm throwing way too much information in here, please let me know.? I'm new to this forum.? If you need any further details, I'm happy to provide them.
