AGW will do this very well.? On the Raspberry Pi with the radio
(rpi#1), run Direwolf with AGW enabled.? Then on the other Raspberry
Pi (rpi#2), setup your APRS application to use AGW and put in the IP
address of Rpi#1 and it should just work.? If your APRS application
doesn't support APRS, try doing something similar but with TCP-KISS
instead.
--David
KI6ZHD
On 04/12/2025 11:06 PM, nick.k6nlc via
groups.io wrote:
toggle quoted message
Show quoted text
I want to link two separate PCs (or raspberry pi's) running
on two separate routed networks similar to a KISS client/server
configuration. Both networks have access to each other but only
one has a radio resource and internet connection; I would like
to send APRS data from one network without resources to the
network that does.? Is there a method for achieving this?? The
ICHANNEL feature looks like it would be able to do this but
direwolf does not act as a KISS client.? I have a work around
that uses another program to receive data via KISS and pass it
to the internet via APRS-IS.? I would like to use direwolf, if
possible, to keep the installations lightweight.
