Scope Probes
|
As long as you have probes with the bandwidth you need, I have found they work as expected. The brand I bought was RioRand. I imagine that all of the ones with the same coloration and images in the product page are probably made in the same factory. Of course, remember to trim the probe (screw cap on BNC end) with the reference signal on the scope. On Sun, Jun 23, 2024 at 11:06?AM mike allen via <animal=[email protected]> wrote: hey folks . I have a new to me Tek T922 scope that came with no probes . --
Buffalo John |
|
Mike, pretty sure I got mine from pomonaelectronics.com. probably not as cheap as Amazon, but should be better quality. Might also check out jameco.com, or Mouser electronics. Haven't used them recently, so don't have their URL anymore.? My scope isn't a Tek, as that one was huge & heavy, so it got sold before I left SC in 1991 on my way to Germany. Starts with a B, and was a third the size of the old Tek... It's in the cabinet under my reloading bench. It won't power up now. Expect I need to replace all the capacitors. Was a pretty nice scope when I got it from my FIL way back when. It's in the Tomorrow File. Bill in OKC? William R. Meyers, MSgt, USAF(Ret.) Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement.? SEMPER GUMBY! Physics doesn't care about your schedule. The only reason I know anything is because I've done it wrong enough times to START to know better. Expect in one hand, expectorate in the other. See which one gets full first.
On Sunday, June 23, 2024 at 01:06:15 PM CDT, mike allen <animal@...> wrote:
hey folks . I have a new to me Tek T922 scope that came with no probes . It seems that my ex bud that returned my Hp scope not working also forgot to tell me he managed to break the tips on all my Tektronix probes that were in the pouch . There seems to be (of course ) plenty on Amazon & just wondering if anyone here has bought any probes from Amazon & if the were happy with them or not & which ones they got . The New Tek work's very well on one channel so I got some trouble shootin coming up around the bend . The Crt is crisp & ya don't have to crank up the intensity to se the trace which is always good thanks animal |
|
That sounds right! I've not actually needed an o'scope since I left for Germany, but wanted one several times. Accumulated the stuff to put a smallish 'tronics workbench together but not actually done it. Bought a light duty rework station for SMT boards some years back, and it only worked one time... Was dead the next time I plugged it in. Set all the other stuff aside because I already had too many hobbies going, and had just started the machine shop class. Another thing for The Tomorrow File. Bill in OKC? William R. Meyers, MSgt, USAF(Ret.) Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement.? SEMPER GUMBY! Physics doesn't care about your schedule. The only reason I know anything is because I've done it wrong enough times to START to know better. Expect in one hand, expectorate in the other. See which one gets full first.
On Sunday, June 23, 2024 at 11:37:09 PM CDT, mike allen <animal@...> wrote:
Thanks John , have a set comin , be here when i get out of the hospital . Caps is a good place to start Bill , also cold solder joints . They put handles on scopes not for carrying them their for slamming them down on a bench . They also use several different voltages in these units . Fortunately I was able to find a service manual yesterday . but if I don't get anywhere following the flow chart I'll just put the cover back on & call it a single channel scope . Bill yer scope may be a BK Precision ? animal 开云体育 Links: You receive all messages sent to this group. View/Reply Online (#1969) | Reply To Group | Reply To Sender | Mute This Topic | New Topic _._,_._,_
|
BuffaloJohn
Bill in OKC too