Septembers 2021 cover photo?
Burger holders 3D printed.?
Photo shows Male and Female halves fitted together.
The female tenon air gap is 2 mm wide , male tenon is1.5 mm thick, total height 38 mm.
Two halves printed at the same time in one color, second set printed in a different color, then mixed and matched?
to emulate the famous Burger supplier colors.?
An excellent test for proving out accuracy of 3D machines and a practicle present for regular Burger eaters.??
Simple rinse under warm soapy water for hygine purposes after use.
I hope of interest.
Have a good digitalhobby September.?
--
John
John Lindo