开云体育

John Lindo < bechetboat@... > ----------------------------------- 13:55 (3 hours ago) to Charles , Richard Hi Guys. Just ran a simple 40 mm square cube with A B C 1 2 3. 3 mm deep. X

Mandatory "Hi" here. I prefer to read and learn the majority of the time.

Thanks and any help you need, just post John

Hello

Hello, Like Bill in OKC; I am really only remotely interested in CNC now because I already have too many hobbies as it is. My real interest is in learning the manual machines (metal and wood) and some

Finished assembling an Acrylic prusa Geeetech I3, I have the prusa Geeetch Aluminium frame type, this Acrylic should be sold next month, the customer wanted a fully assembled printer that was

Just finished printing burger holders, one half slips into the second half by means of a slot. Printed 118 % larger than the attached STL files. A standard 200 mm x 200 mm printer will take both

Hello forum members Cover photo August 2021 shows a 125 mm dia chcuk (nominal 5") fitted with master jaws . These were machined using phosphor bronze (PB) material. The slave jaws are bolted and

I guess no one on DH needs it or is close enough to pick it up, so I will try Craig's List. Thanks! -- Regards, Charlie New Jersey, USA *SATTINGER’S LAW: It works better if you plug it

Hello, All, I don't know how many of you live within driving distance of Central New Jersey, but I thought I would post this here first. I have a machine stand that was given to me by a friend. I

I believe the ELS group is more active than this group. I am ending my membership in this group today. Good day.

Hello

Hello, I am on the way to transform my Emco Unimat 3 to CNC on a budget way. Lot to learn and forums like this helps me not to do every fault once again. Still not at a level to contribute valuable

Hi, Prasad, I ended up removing all the internal gears except the "dumbell-shaped", high-low double-gear that was mounted on the spindle to do my belt-drive mod. I left that in place to add a bit of

Bonjour! Dave Crowther

I want to stay on.

Thank you Charlie, you are my wizard with words , my William Shakespeare. I just cut metal with the digital stuff. Also a big thanks for all forum members. it's been a crazy week, from zero posts in

Hello!

Hello, If you are concerned about an excessive number of emails from DH or other IO Groups, you can change your email delivery from "Individual Messages" to "Digest". You will then receive one email

Ralph I am sure Richard will respond to his RELS system Thanks John wrote: