开云体育

Dave, I believe the very latest build can be found at http://www.d-rats.com/download/tmp/. I think this was just some kind of forms update, but it is a known good build. Good luck! Dan W4DTO

Where would I find source code for any of the builds? Latest daily build preferred. I haven't had any success connecting to the dev.d-rats.com address. vy 73, Dave N4KD

UR= CQCQCQ R1= VY1RDS C (C for 2M, B for 440) R2= VY1RDS G Make certain that down in the lower left corner of the D-RATS screen below MAIN in the window it shows your radio connection when you Tx, if

Hello David, We've received at least your other message but you need to be patient to let people reply. Sending multiple emails doesn't help much... The Dstar setup for Drats is identical to any

Radio:Set UR, R1 and R2 as if you are making a voice contact with another radio.Set the radio to low speed data mode. This includes turning off GPS and setting DV DATA TX to AUTO.Confirm the speed

This is the 3rd time I have tried to send the message but will try again. 1. First the time it must be that the dstar radio is still up wrong. Would you confirm what the UR, R1, R2 should be.

Sorry about the late reply but have been very busy with the local dog races, festival. Thanks again for the reply. I did answer this once but I guess it did not go anywhere. 1, We have just two

I suspect your software repeater configuration isn't setup correctly or the radios on the system aren't configured correctly to access the software repeater. Every device on the "network" needs to be

Everything is working and communication is made to and from the repeater, but other stations do not see each other.

Call signs are used and all radios with software is working, but the other radios do not see the other radios talking

Everything is working from software to radio, radio is transmitting on a pink, and repeater answers back to the software. The problem is that other radios on the repeater do not see the other

All software is up and running, all radio's are connected to the D-Rats software. All radio's will transmit to the repeater, and gets a reply back from the repeater on the screen. So everything is

My first question is "Do you have voice communication between the two radios you are using?" If that is not working, then D-RATS will not. Assuming that you do have a voice path, you must configure

Do you have a D-RATS software repeater setup and running? Is each of the stations in your "network" running D-RATS on their own computers and have their computers connected to their Icom radios

Greetings, I may be all wet - but I suspect that the connection must be between the stations must be done like old packet radio rather than APRS unproto. In the message section panel there is a

A friend of mine is trying to set up D-Rats with our D-Star repeater so that we can send formal messages and files to stations from our EMO station. The radio's are connecting to the D-Star repeater

Hello Thomas, D-RATS is written in Python and uses the WX GUI framework which doesn't exist on Google Android, Apple IOS, etc. As such, it would require a complete rewrite to support either

Most of you folks are smarter than me, but I got to thinking the other day. Wouldn't it be neat if D-RATS could be an app on my smartphone? I haven't played with it much, but Icom does have that

Will give that a look Patrick, thanks. Jeff kb5nmb

I'm glad to hear you have it working. If you are interested in the mapping feature, try making a map overlay with static points. You can add markers for points of interest using icons similar to the