开云体育

I've seen that behavior with the older Pi (A and B) models. They did not handle "hot plugging" ?(connecting USB devices while powered) very well. It would usually cause mine to reboot, or the device

I can tell you that I have had to restart the Pi every time I disconnect the USB/serial cable. No matter if it shows up in the repeater software or not as the correct port. It looks like it

Hello Keith, This is incorrect. To confirm it: have your USB to serial adapter connected to your RPI and then run the command "dmesg". Now remove the USB device and then run "dmesg". Now plug the

Hi Roger, You should not need to re-image the SD card to reset D-RATS to the defaults. On all Linux versions (including the Raspberry Pi) there is a "hidden folder" that holds your D-RATS

I should have mentioned that I don't have Drats actually connected to a radio. The change I made was to try and connect to a ratflector by adding an IP address. Thanks Roger, N7BU

Whenever you make a change in the preferences that has to do with an actual radio, as in using a Serial to USB cable from the Pi to the radio, you have to restart the Raspberry. Simply disconnecting

I had Drats up and running on my raspberry pi. I made a change in the preferences by adding a new radio. When I went back to change radio, I got an error message on Drats saying there was an error.

Hey Dan, Ok.. thanks and that's encouraging. Could you tell me exactly what you have configured in the D-RATS "radio" section, the Network TCP Gateway, and Network TCP Forwarding sections? Also,

I have had this running for about a month, and it is working well Not sure at this point that I can tell you any of the steps to getting it installed. I wasn’t smart enough to document how I did

This is a great question. It's something I've always wanted to try.The ircddb system supports running D-RATS on the gateway computer. I don't know anymore about it than that.Since you mention Centos,

Hello Everyone, I'm curious if it's possible to add the D-rats python application directly onto the D-star / Centos Linux controller and avoid having to have an external computer and radio to create

The last time I was able to connect to the drats.com ratflector was Thursday afternoon (Oct 22nd). I know this because I had to reconfigure my modem ports after a network outage and reset. I couldn't

Since the Winlnk Development Group has announced the implementation of secure password access and that in six months time they will reject any connection to a CMS without a password, does anyone have

Hello Patrick, Thanks for the help here. I've never seen this "database" feature on Yahoo groups before. To get to it, you have to goto

The Ratflectors run by KK7DS are currently offline. They may return at some time. Until then, look in the database section of this group for more ratflectors to choose from.?Patrick (N3TSZ) To:

David, The first and only time I played around with D-RATS a few months ago I was connected to ref.d-star.com and there was a lot of traffic and I chatted with some very helpful people. I can not

Hello Everyone, I sent Patrick a D-RATS message a bit ago on the WA7FW Ratflector but I thought I'd try the list too. It seems the ref.d-rats.com:9000 and ref.d-rats.com:9001 ratflectors down? They

I'm not a MAC user, but I would think you could the port the other software is using and type it into the D-RATS add a port box. If it's like Linux, it should be something with a TTY in it. Just don't

Best bet is to list your /dev directory and see what is listed. For example, on my iMac running OSX and in FLDigig the port I use is "/dev/tty.usbserial" Dan KJ6RGX