开云体育

Patrick, do you know the data port speed of the id5100? Jim. K6nra

The RT Systems blue cable with a 3.5mm phone plug is a cloning cable and can not be used with D-RATS. The RT Systems orange cable with a 2.5mm phone plug is a data cable and allows access to the low

I would suggest double checking all of your Radio settings to be sure they are correct per the D-RATS suggested settings. What version of D-RATS are you running? I use the RT Systems USB-RTS05

Jim: I have tried the RT System cable on my ID 5100 and DRats with no success. It sounds like you have done something like having a radio working with DRats with some cable. Then leaving the

Right, none of the RT system cables I have can not be used to control radios, only to program them. Jim k6nra

Turns out the repeater is fine, one of the radios (2820) I was using was not programmed for the repeater, only simplex, problem solved. Jim k6nra

Problem on the IC92AD solved. I had no issues using voice on DSTAR. My problems were with D-rats. I've used several models of radios with D-Rats and usually communicating to the radio at 9600 baud.

It’s likely one setting missing. If you follow the settings in /g/d-rats/files/D-RATS%20Radio%20Settings.pdf from the D-RATS group, it will work. John WB4QDX Sent: Saturday, June

Have you tried a different repeater?There have been reports of some non-Icom repeaters not behaving well with older D-Star radios. RayKI4UDZ?

Since most of the RT Systems cables are pretty much proprietary, I would try a basic cable and see what happens. That is about the only thing you haven't tried. Mick - W7CAT

I have created a PR for my fork that adds the missing radio types to the repeater. I don't have a way to test these. https://github.com/wb8tyw/D-Rats/pull/209 73, -John

Hello Patrick, I was just looking at the D-Rats repeater code. You are right, there does not seem to be any code in it to support AGWPE, so it is not using entirely common code as other types are

I have done that but for some reason it still doesn;t show up on their side if they are using winlink express. do I need to add anything to the path on the

Hello Patrick, I think Rod, ka5mye was able to get that AGWPE with my python3 fork to work on the client. As near as I can tell, the repeater code uses the same code as the client application, so it

Patrick, I have never been able to get the Request Mail Check to work.??From the look of the thing, it allows the requesting station to pass its account credentials and password to the other station

I HAVE D-RATS BUT DON'T KNOW HOW THE MAIL WORKS FOR SURE YET. I GOT YOUR EMAIL ON G-MAIL. IF I SEE SOMETHING FROM YOU ON D-RATS I WILL REPLY. GL AND 73 DE KC5SAM wrote:

Was this test a success?

John, I've used that with two UV-5R's & Direwolf. It's been quite a few years now though. I would Imagine at least 1 of the machines was a raspberry pi & the other end was windows (I only had the 1

That may very well be true. There are several features in D-RATS that Dan started working on, but never followed through to the end. This may be another one. Speaking of which, the AGWPE connection in

Hello Patrick, All, The mailcheck button asks for you to select an account, and gives a choice of the locally configured accounts, and an additional account named "Other" is is created by the