开云体育

I removed the repeater from the setup and ran everything as simplex and all works fine. This however makes use of this software for EmComm purposes very limited for the 1700 square km that my team

Glen, Thank you for the explanation of the color coding of the callsigns in the Stations column. In my situation, because there is some kind of issue with the communications between these three

The radios I am working with are all older models. D-STAR ready The ID-880H provides D-STAR DV mode digital voice and low-speed data communications. The IC-80AD supports the D-STAR “DV” mode,

Ron, There is no SignalinkUSB involved here, though I do use them for Winlink Packet and VARA FM occasionally, but not at this time for this use case. I am also intrigued by the comment "Also when

Mike, When a ping comes back with the station’s callsign in black, it indicates that the station just recently signed off. Those in blue are online or on the air. The reason to know that a station

Hi this Ron / WB3ILX, If you are using a Signal link or any device in the 6 pin mini din on the 880H just plugging the device in puts the 899H into analog FM mode. At least it does on mine. Just

Please also be aware that there are 2 data modes in D-Star: DV low speed and DV ligh speed. DV high speed is not supported by all radios, while low speed is supported by all of them.

Marius, Thanks for the swift response. I did think that was the issue I was seeing, Two radios both trying to respond simultaneously to a single CQCQCQ. I have now removed one of the radios and the

This is a consequence of the CDMA concept in D-Star data transmissions and to the fact that the radio's "are all programmed the same except for callsign". The radios will check both that the channel

I am testing out D-RATS for my local club from an EmComm perspective, because we bought into D-STAR a while back and have a large number of ID-880H and IC-80AD radios and I want t put them to use. I

Try this:File>Preferences>TransfersSet Warmup Timeout to 1.Set Warmup Length to 8 and increase as necessary until you have reliable communications. Patrick (N3TSZ)

Our weekly group uses a nice Icom repeater stack for D-Rats practice weekly. We have found chat is fine, but file transfers are slower and less reliable over the repeater than simplex. We suspect a

I had the same issue with my 7100 via USB. I called Icom and got a guy who knew the whole story. The USB cable sends out serial in packet format, so it sends it in bursts of data. A short "chat" line

Has anyone been able to successfully use D-RATS with the 9700 using just a USB cable? I'm able to get the radio to TX when I start D-RATS, but it TXs multiple times non-stop until it eventually stops.

The MSYS2 distribution for Microsoft Windows no longer supports 32 bit machines, and will be dropping Windows 7 support sometime this year, if they have hot yet done so. I have not tested on a 32 bit

Need 64 bit machine for testing these John?? Ralph Barbakoff (WA9LKZ)

Updated tarball and wheel files uploaded. This fixes the pip install on Ubuntu 20.04 and with a small additional fix gets the pip install working on AntiX-21 Linux. On AntiX-21 Linux, and this may

Hello All, I have added to the ham-radio-software WIKI information on how to install the Python3 based D-Rats on Microsoft

Hi Glen! I seem to have it working... * First, an SMTP server must be configured in Preferences/Outgoing mail, a a POP mail address must be configured and enabled using SSL in Preferences/Email

Thanks. I have already tried sending to regular email. That works, but Winlink does not. I'll try sending to a different Winlink account,??and I'll try your suggested changes. Carl