Hi David on the ratflector do I gave to add something to path or I just leave everyting in blank??
I think the router is the problem. Even though I downloaded the port forward utilities they do not have the exact model. So I ve tried with some other that look similar on the list as per their instructions on the web.?
I even found some instructions on how to do it manually. But it does not seem to work neither.?
I m waitting for them to find a solution to this challenge. As a matter of fact, their app has some open port verification tool. And even with their program it does not seem to work.?
It looks like the port forward app sends a ping to their site if it comes back then I guess that means is working.
?So far no luck!?
Np3jd
toggle quoted message
Show quoted text
?
The best I can tell, either your port forwarding is not working for TCP connections or your RatFlector is not allowing a connection:
?? $ telnet 66.50.50.18 9000
?? Trying 66.50.50.18...
?? ^C
?? $ telnet 66.50.50.18 9001
?? Trying 66.50.50.18...
?? ^C
--David
KI6ZHD
On 09/14/2022 07:01 AM, José David Colón Custodio wrote:
Well I have not done that last step of renaming it so I' m using to test the ip address that I get from whatismyip.com on the rpi 66.50.50.18
I also used the Port Forward Network Utilities software but I did not list my router. So I did configuration on the router manually under Virtual Services.?
The static IP address (192.168.8.101)
Wan port 9000-9500
Lan port 9000-9500
Tcp/udp
And I still scratching the back of my head jaajaj
What have you called your Ratflector please?
I'll set up a NET address and see if I can get a response from it.
Cheers - Dave (G0DJA)
--
Dave (G0DJA)
Bolsover, UK
|
?
The best I can tell, either your port forwarding is not working for
TCP connections or your RatFlector is not allowing a connection:
?? $ telnet 66.50.50.18 9000
?? Trying 66.50.50.18...
?? ^C
?? $ telnet 66.50.50.18 9001
?? Trying 66.50.50.18...
?? ^C
--David
KI6ZHD
On 09/14/2022 07:01 AM, José David
Colón Custodio wrote:
toggle quoted message
Show quoted text
Well I have not done that last step of
renaming it so I' m using to test the ip address that I
get from whatismyip.com on the rpi 66.50.50.18
I also used the Port Forward Network Utilities
software but I did not list my router. So I did
configuration on the router manually under Virtual
Services.?
The static IP address (192.168.8.101)
Wan port 9000-9500
Lan port 9000-9500
Tcp/udp
And I still scratching the back of my head
jaajaj
What have you called your Ratflector please?
I'll set up a NET address and see if I can get a response
from it.
Cheers - Dave (G0DJA)
--
Dave (G0DJA)
Bolsover, UK
|
toggle quoted message
Show quoted text
On Wed, Sep 14, 2022 at 09:01 AM, David Ackrill wrote:
As I suspected, it didn't work.
The setup had not saved properly, so I edited it and put the 66.50.50.18 in again, but it still failed.? This time it said;
"Unable to connect (Unable to connect ([Erno 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host failed to respond))"
?
--
Dave (G0DJA)
Bolsover, UK
|
On Wed, Sep 14, 2022 at 09:01 AM, David Ackrill wrote:
As I suspected, it didn't work.
The setup had not saved properly, so I edited it and put the 66.50.50.18 in again, but it still failed.? This time it said;
"Unable to connect (Unable to connect ([Erno 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host failed to respond))"
?
--
Dave (G0DJA)
Bolsover, UK
|
As I suspected, it didn't work.
I got the network error message "Unable to connect (unable to connect ([Erno 10049] the requested address is not valid in its context))"
--
Dave (G0DJA)
Bolsover, UK
|
I'm not sure if I'll be able to connect, but I'll give it a go in a minute and will report back.
--
Dave (G0DJA)
Bolsover, UK
|
Well I have not done that last step of renaming it so I' m using to test the ip address that I get from whatismyip.com on the rpi 66.50.50.18
I also used the Port Forward Network Utilities software but I did not list my router. So I did configuration on the router manually under Virtual Services.?
The static IP address (192.168.8.101)
Wan port 9000-9500
Lan port 9000-9500
Tcp/udp
And I still scratching the back of my head jaajaj
toggle quoted message
Show quoted text
What have you called your Ratflector please?
I'll set up a NET address and see if I can get a response from it.
Cheers - Dave (G0DJA)
--
Dave (G0DJA)
Bolsover, UK
|
What have you called your Ratflector please?
I'll set up a NET address and see if I can get a response from it.
Cheers - Dave (G0DJA)
--
Dave (G0DJA)
Bolsover, UK
|
HI, I've trying to create a ratflector on a pi. I used the document written? by N7BU that is on files on this group.?
I even got the ping to my gateway. I opened drats and created a localhost:9000 as per intructions to monitor the ratflector.
BUt on how to setup the ratflector on the internet, it only says that I have? to check "allow all incoming network connection"? and hit the "on" button .?
Then when I run the Drats program on the pi, I see a terminal windows that pops up with some info. But When I do the same with Dratflector and hit "on" the other terminal windows that pops up shows no info at all.
What makes me think that the ratflector program is not working.
I also jumped to another computer to see If I was able to get to my ratflector so I went to radios and created it whit the ip address that I get from whatismyip.com with port 9000.?
So far no lucky running the ratflector on the internet, please if anyone has some other instructions on how to set it up I ll rally appreciate it.
Respectfully?
Jose David
NP3JD
|
Re: Unable to run D-RATS after install
One drive is part of Windows and installs automatically. ?You can turn it off by telling the computer to only store data on the local computer. ?Then you have manually create the drats Share folder in the users\your name\ Desktop directory. ?Then reinstall drats. ?If you have trouble getting the maps to work copy the line from the landscape url up to the CycleMap url and the maps should work if enter your correct GPS coordinates for your location.
Ron : WB3ILX
toggle quoted message
Show quoted text
On Sep 12, 2022, at 11:18 PM, Edfel Rivera <edfeljose@...> wrote:
?Hi:
Well I have something to try but will be later this week. Very Risky.? Will share is it work.??
Nothing to do with D-Rats, but to deal with OneDrive ... which have 'captured' the whole Desktop.? Unlinking, uninstalling not changes the Desktop folders OneDrive refence - preferences even for new folders.?
Thanks Guys!?
73'
Edfel
|
Re: Unable to run D-RATS after install
Hi:
Well I have something to try but will be later this week. Very Risky.? Will share is it work.??
Nothing to do with D-Rats, but to deal with OneDrive ... which have 'captured' the whole Desktop.? Unlinking, uninstalling not changes the Desktop folders OneDrive refence - preferences even for new folders.?
Thanks Guys!?
73'
Edfel
|
Re: Unable to run D-RATS after install
Hi All:
Well? I suspected from OneDrive reference in folders.? Confirmed.? Well I think this have nothing to do with D-Rats.? Not sure when I installed OneDrive but I have tried unlink, uninstall and everything in Desktop keeps reference to OneDrive\Desktop.? Even new folders after unlink.
Thanks all for your help.
Edfel
KP4AJ
|
Re: Unable to run D-RATS after install
If you are running OneDrive, it moves the Desktop files to OneDrive and D-RATS fails on install. There are instructions to get around this at
.
?
John WB4QDX
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
Kyle Tupin N5IMC
Sent: Monday, September 12, 2022 2:14 PM
To: [email protected]
Subject: Re: [d-rats] Unable to run D-RATS after install
?
The d-rats.config file does not exist in the folder ....AppData\Roaming\D-RATS-EV as mentioned above.? I have evening deleted and tried re-installing it again.
Kyle
|
Re: Error after drats install
Got it working , Thanks to RON for helping out. It happened to be the shared desktop folder in the user directory .
Kyle/N5IMC
|
Re: Unable to run D-RATS after install
Got it working, Thanks to Ron.? It was the shared desktop folder after all.
THanks
Kyle/N5IMC
|
Re: Unable to run D-RATS after install
The d-rats.config file does not exist in the folder ....AppData\Roaming\D-RATS-EV as mentioned above.? I have evening deleted and tried re-installing it again.
Kyle
|
Re: Error after drats install
Now I get this error: 
|
Hi All:
I vote for this feature to be added (IF possible) after other issues are addressed.? Similar to Packet but VARA I think is faster (particularly VARA FM).??
73'
Edfel
KP4AJ
|
Any thoughts about adding an option to run DRATS over VARA?
|
Re: Error after drats install
This is a simple fix.? You must make sure that the “D-Rats Shared” folder has been created. ?The default has the program looking for the file folder on the Desktop.? You can simply create the file there by right-clicking on the Desktop,
selecting the New Folder command and naming the folder as D-Rats Shared.? Once the program starts normally, you can go into Preferences and select the Paths Tab.? You can then tell the program where you want it to look for the shared folder and then you must
manually move the shared folder off the Desktop to the new location.
?
Good luck running D-Rats after that fix.
?
Glen – KG5CEN
|
Edfel Rivera
Troy - K4JDA
Glen Strecker