开云体育

D-RATS will work in DD mode. It just needs to be setup as IP just as you would for going over a network. A good use would be a point-to-point application transferring files or forms between two

The emission designator and bandwidth does not change for voice, data or both. It’s still 6.25 KHz. John WB4QDX Sent: Wednesday, February 22, 2023 7:39 AM To: [email protected] Subject: Re:

On 2/22/2023 5:20 AM, Michael Mandell wrote: <snip> > No idea why some can't get Python2? to run While you can still run python2 D-Rats on Windows, We can not run python2 based D-rats on current

Yes, I discovered that yesterday that the slow speed digital data mode is interleaved with the digital voice and has no correction. One of my projects that I am working on is connecting a MMDVM GMSK

Unfortunately I got a chance to try to figure out what FreeCAD is doing, and I could not. FreeCAD is using lots of CMAKE macros and programs for the build and it will probably take me over a year to

It did! Was used on VHF/UHF there long before being used on HF. Yes, and I don't believe data on DStar is allowed on HF. Way too wide. Voice is allowed, which is the only DStar I've ever seen on

Well, 3. DD is that rare mode that's still around and has apparently confused some in documentation. The ID 1 and 9700 can use that, but it has nothing to do with D-Rats.

John: Take another look at the D-Star spec document you reference. I think you are confusing slow-speed (or fast mode) conncurrent voice/data D-Star with DD mode. DD mode is an entirely different

John, Thanks for that reference. Very interesting and useful. However, it says that the slow speed data frame has no error correction at all, as a previous comment stated. I was also told this by Icom

I also have (and use with D-Rats) an 880H. I'm sure you know the settings and menu stuff is nowhere near as easy as the 5100. ID-800H 9600 DVT = DVTAT, SPD = SPD96? ? ?....this from D-Star info. On

Well, I run it on a Win 10 laptop and a Win 11 desktop. I'm running the 3.9 Python 2 version. I used the Windows installer, which puts on Python 2 (I think). It runs on both machines reasonably well

This is encouraging, even if it takes awhile. We have a few knowledgeable people trying to keep D-Rats going, you being one. Thanks. D-Rats has great value to emcomm as it is the most complete package

Two of us installed the version 0.3.10b6.dev287 yesterday, I noted no significant change in operation from any of the previous installs. I am one of the successful Tx/RX stations here (knock on wood).

It appears that you are not running D-Rats 0.3.10b6.dev287. You appear to be running the older python2 based d-rats, which will not work with python3 very well. The way it should work is below, but

John, I have found a problem, my doing. D-Rats is installed in a One Drive\Documents\D-Rats-0.3.9_WindowsXP\D-Rats-0.3.9 folder. In that folder are files for python 2.7 as well as a zip file with

So far the most important question has not been answered. Is the digital data getting from the radio into D-Rats at all? For that the "sniff" and "raw" must be enabled on the radio port in

Good Morning All! I do not believe that the radio used has any effect on successful Tx/Rx decode, we have tried a number of radios as I stated. Also would add that some of the Win7 and Win10 machines

I have updated that wiki. If you ran the msys2_packages.sh script though the python-virtualenv is already installed. It really does not mater what you put in for "my_hostname_venv". It the

John, my installation as stalled at Setup of a Python Virtual Environment for running D-Rats 101.010 Running D Rats in a Python virtual environment and PIP - Microsoft Windows Msys2 Mingw you

On 2/19/2023 10:31 AM, Scott Allison (KR3L) wrote: > Don, > I had a similar issue with the python not running. I found it was not > installed on my computer. These are the steps I took to install. >