Hello Luis,
Thanks for the reply.? So for a higher speed setting, maybe
something like:
?+-- Radio
?????? |
?????? +-- Transfers
??????????? |
??????????? +-- Block Size:? 1024
??????????? +-- Pipeline Blocks:? 8
??????????? +-- Set Warmup Length to 0
??????????? +-- Set Warmup Timeout to 0.
Any recommendation on the PIpeline blocks?? Maybe double it to 8??
More?
--David
toggle quoted message
Show quoted text
Hi ... "??I'm also curious what the impacts are around
tuning " ...? Depending on whether you are going to use the RADIO,
the NET or even a TNC you have to adjust so that the transfer is
the most effective. 1.024 to NET, 512 to RADIO or TNC .
-
Warmup
Length:?The number of bytes to prefix to each
packet after a period of idle. This may help to "warm up" a
handheld radio on the receiving end that is in power save
mode. Revert resets value to default settings.
-
Warmup
timeout:?The number of seconds between
transmissions that is considered to be "idle", thus causing
the next transmission to include the prefix pad, as
described above. Revert resets value to default settings.
-
Force
transmission delay:?Always?wait this
many seconds before transmitting a packet. Revert resets
value to default settings.
