开云体育

The trick to mounting a SMT IC like that is to tack solder one of the pins when wiggling it into place.? Once it's straight on the board, you want to tack a second pin.? Ugly is fine.? Then

I was just looking at the datasheet for the?KT0936M.? That is one amazing little IC !!!

Guys, Stay tuned for the review video by Peter Parker, VK3YE. https://youtu.be/-ceggrSqU4M <https://youtu.be/-ceggrSqU4M> Thanks, Adam

Guys, During the holiday, I have prepared some CPK-3 KT Receiver kits with SMD part pre-assembled. For those who are reluctant to solder SMD parts, you can consider this kit at 16 USD (14.5 USD + 1.5

Guys, As Spring comes for the most of the world, it is a good idea to do some ARDF kit building and fox hunting. I just updated the photos and some info about R3500D kit at: http://crkits.com Thanks,

Tim, Good luck. Take care not to short the 5V to GND as the on board 5V regulator does not have the short circuit protection. Don’t touch any of the pins of Arduino. Build along the modified parts.

Adam, Received parts today, hope all goes well with second time around. Thanks, Tim T K8TAT

Thanks Matt. The publisher likes your article indeed. One of the local school teachers contacted me for a possible class using the CPK-3 kits. He said, it would be good to bring the kit assembly back

Tim, Please make sure your test points are aligned. If you still get 12V on 5V test point, please contact me for solutions offline. Thanks, Adam

Hi Adam, Good News, a new Articel (from me) about the cpk-3 will be published in August 2024. I think the publishers of the CQ-DL like your KITs. This year we have the year of education and? young

Adam, Yes the light on the nano is lit no problem there. Ok, like to know how the 5v regulator isn't working, followed the assembly manual to the letter, so guess I'll have to see if can unsolder

Hi Tim, There are two regulators on the Arduino Nano board. One is 5V and the other is 3.3V. It looks like your 5V regulator is damaged, but 3.3V regulator is okay. With 12V on C1, can you still see

Up to testing step #3, testing voltage on + pad of C1, and I get 12v, not 4.93, but I do get 3.41v of left pin of R1, is something wrong here?

Have a Great Holiday! ?n vin., 2 feb. 2024 la 03:58, Jim Burns <outbackerwb4ilp@...> a scris:

Hi Adam, Looking forward to your next project. Have a Great Holiday ! Jim WB4ILP

Gong how fat Choy! Cheers, PT

Guys, We will soon start our new year holiday. No shipping from Feb 3 to Feb 17. During the holiday, I will prepare something for the coming Spring. Thanks, Adam

Thanks for your support. I am sure many people will need the TCXOM daughter board. M stands for module or modification. Thanks, Adam

Adam, if you come up with some sort of TXCO daughter board, I would likely take ten of them, honestly.? I have a lot of projects that use si5351 boards and have long wondered why this hasn't been

Guys, You might be interested to know this TCXO mod. I am developing a module to make the mod easier. https://mp.weixin./s/3Bywa_fu-r8a3qpa4VLWmA Thanks, Adam