开云体育

In D4D Kit Assembly Manual, Rev.D, pages 21-22, there is text: "In setting windows Radio tab, choose Rig to none and PTT to VOX". What is the application where this configuration is to be performed,

I was intrigued by that bug as well. A little searching opened up a whole world of Keys made from binder clips. Start with this YouTube video ( https://www.youtube.com/watch?v=RtEYI4aF7j4 ).

Hi Adam,Where can this kit be purchased?THANK YOUBOB AF2DX Folks, Designed by BG1REN and kitted by BD4KG, the new enhanced pixie board kit features keyer, side tone and TX/RX frequency offset. 40m

What is the paddle on the box in the last picture? 73 ! Juha oh8cw to 12. joulukuuta 2019 klo 7.06 Adam Rong <rongxh@...> kirjoitti:

that is one cute little rig. my only trivial suggestion would be to use a phono socket as a cheap/cheerful/robust antenna connector to avoid the cost/fragility of the sma socket (and sma/bnc adaptor

Folks, Designed by BG1REN and kitted by BD4KG, the new enhanced pixie board kit features keyer, side tone and TX/RX frequency offset. 40m and 20m versions are now

I made the changes suggested by WB2LDH. The most power out, with both WSJT-W and soundcard at max, is 600mW as measured by my Elecraft W1 power meter. Can you suggest a value at for capacitor

Hi Frank and thank you for your reply. The only rig I have ever had is my SG-2020 and rarely use it. However I thought since I have the parts I might as well install it. Next I want to install the

Hi John, Yes I added the RF control to the back panel above the power jack. Just position it so that it will fit in the corner with just enough room to clear the top and the side and the power

I was wondering if any of the HT-1 user had added the RF control while leaving the AF control connected. If so where on the back panel did you drill the hole for the control. Thank you. John

Thanks Jim, your reply did help. I have already purchased the Sunfounder open box(it says something about a plastic corner being chipped). I am going to use your setup as a reference for this. One

Hello Adam, Thanks for your statement on the amplifier. Quick question, Only reason I am even thinking of adding an amplifier to mine once purchased is my Antenna Restrictions. With my regular FT8

Thanks Adam...No need or desire for an amplifier...1 watt is plenty and gives me the challenge I'm looking for...I get a lot of replies with QRP in the CQ message...Anything greater than QRP is just

Kind reminder: Don’t add an amplifier for a DSB transceiver for digital, as your neighbors will complain to you about adjacent channel interference. Thanks, Adam

Hi Thomas...Thanks for the kind words...First, I am still new to FT8...I was introduced to it at Field Day this year...I am not an expert in anything but I've always been a builder so Adam's kit

Sorry Jim, one last question. The way you have the PIE mounted on the back of the screen. Was that something that you came up with on your own or was there a mounting spot on the back? Sorry if it

Hello Jim, I want to HIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIGHLY COMMEND you on that project. When I saw this my EYEs got so big. This is absolutely AMAZING MAN!!!! I want this EXACT setup brother. It

Just a tip about posting ePrey (eBay) URLs, you don't need to include anything from the question mark and onward, so, the URLs posted can be simplified

If you had to buy everything "brand new" you'd probably be under $200...Not bad for a complete portable/mobile/fixed FT8 station...

Thank you