Re: 2 CPK-4 plus an AM radio make a complete station
I can vouch this approach works well provided the band isn't crowded.
?
Demonstrated here:
https://www.youtube.com/watch?v=GGBvJZx69uI
|
Re: 2 CPK-4 plus an AM radio make a complete station
Inspired by this idea, I just submitted a short piece for QRP Quarterly.
Thanks, Adam
toggle quoted message
Show quoted text
在 2024年9月22日,20:06,Adam Rong via groups.io <rongxh@...> 写道:
?Guys,
CPK-4 can work with a SSB receiver to make a complete station. If you just have an AM radio receiver, you can consider 2 CPK-4. Photo:
Take 7030 kHz as an example, you can tune your AM radio receiver to 7030 first. You can use the whip antenna or a separate wire antenna. You should hear no CW signal. Power up one CPK-4, set the jumper to GND and fune tune the trimmer capacitor to keep it oscillating at 7030.7 kHz. Adjust the distance between this CPK-4 and the AM radio receiver to receive some signal. If you put them too close, the AGC will suppress the incoming signal too much, so you should put a bit far away so you can hear the signals in some background noise.
Now, you can power up another CPK-4 as TX. Set the jumper to KEY, fine tune the trimmer capacitor so you can transmit on 7030 kHz and connect a dedicated resonant antenna for TX.
Now, it is ready to grab some QSOs!
Thanks,
Adam
|
2 CPK-4 plus an AM radio make a complete station
Guys,
CPK-4 can work with a SSB receiver to make a complete station. If you just have an AM radio receiver, you can consider 2 CPK-4. Photo:
Take 7030 kHz as an example, you can tune your AM radio receiver to 7030 first. You can use the whip antenna or a separate wire antenna. You should hear no CW signal. Power up one CPK-4, set the jumper to GND and fune tune the trimmer capacitor to keep it oscillating at 7030.7 kHz. Adjust the distance between this CPK-4 and the AM radio receiver to receive some signal. If you put them too close, the AGC will suppress the incoming signal too much, so you should put a bit far away so you can hear the signals in some background noise.
Now, you can power up another CPK-4 as TX. Set the jumper to KEY, fine tune the trimmer capacitor so you can transmit on 7030 kHz and connect a dedicated resonant antenna for TX.
Now, it is ready to grab some QSOs!
Thanks,
Adam
|
Re: Testing RX-888 MK2 High Performance SDR
Adam!? Thank you!? The little kid in me was desperately looking for a public web-888 to play with when I am awaiting shipment!??
?
Had I actually fully read your message I would have seen that!?
?
Fred W0FMS?
|
Re: Testing RX-888 MK2 High Performance SDR
Yeah, sorry Adam.? My CRKits money for the next couple of months went to ordering one of these.? The Tech Minds has a very good video on this device on YouTube. I have a remote location that I want to leave this at so it probably will solve an ongoing problem for me hopefully.
?
I will let the group know what I think a week or two after I get one if you think it's appropriate.?
?
It's a fusion of a Red Pitaya clone (duo), a RX-888 mkII and a KiwiSDR... Runs all the KiwiSDR extensions of openwebrx except for tdoa and HF-DL at this time. So yes, it can be a full hf band skimmer for WSPR, FT4 or FT8.? Does 13 channels will ALL of them supporting waterfall. It's interesting and it is a good price for that horsepower.? ?Can also be used as a GPSFO and as long as it has a GPS antenna it will self discipline the frequency stability.?
?
Just researching all of this will take you down a rabbit hole.? However it's very educational.?
?
Aliexpress US tells me it should be here before October 2, but unfortunately I trust them as far as I can throw them.? I really wanted one so I lifted my ban on Aliexpress.?
?
I am still looking for a URL of a publically hosted Web-888. I will share it if I find one.?
?
Fred W0FMS?
|
BA6QH just published a video of a complete QSO:
Thanks, Adam
在 2024/9/16 8:34, mstangelo@... 写道:
toggle quoted message
Show quoted text
I have a Tecsun PL-368 and it is a great compact receiver for CW and SSB reception. The tecsun plus the CPK-4 make a fine combination.
I wish I have miniture equipment when I started doing portable operation 45 years ago.
Mike N2MS
On 09/15/2024 6:37 PM EDT Adam Rong <rongxh@...> wrote:
And a short field demo video by BA6QH/QRP. I think his receiver is a Tecsun PL-368. I suppose it is the first QSO by CPK-4. He mentioned many years ago his first TX was a similar one with bigger power.
CPK-4 Field Demo by BA6QH/QRP (youtube.com) () Thanks, Adam
在 2024/9/12 21:36, Adam Rong via groups.io 写道:
Just updated the tracking information. I guess some people still haven't watched my CPK-4 kit build video: CPK-4 QRPP CW TX Build (youtube.com) () Thanks, Adam
在 2024/9/12 16:01, Adam Rong via groups.io 写道:
Guys,
Just shipped all the CPK-4 backlog orders. Will update tracking numbers in PayPal or via email if you pay as family or friend. Thanks, Adam
|
Re: If you visit Shanghai
Hi Timothy,
Just spent the Mid-Autumn festival or moon cake festival. A
special one as a strong Typhoon hit Shanghai directly.
Apparently you understood the content very well. I invited all
the readers and ham fellows to visit my shack and spend some time
building a CPK kit. From the comments below, many readers were
excited.
Thanks,
Adam
在 2024/9/16 18:06, Timothy Fidler via
groups.io 写道:
toggle quoted message
Show quoted text
Adam? I saw the post and translated it as I need a nother?
six months for full fluency in Mandarin.
I'm sure the? travel costs in the local? Shanghai Metro are
very low? but unfortunately the? airfare? Auckland? to Shanghai
is? abit high to you know.. pop over for a weekend of Kit
building.? ? My G1M? xeigu has pulled in? 100 W SSB signals from
as far away south as the Katlins which are back of Dunedin. It
pulls in? NSW? SSB and? VIctorian SSB any night you care to turn
it on.? It's the antenna build and the Obvious? skill of the
operator that makes this all possible.?
THe Seven watts has been heard way down Wellington way (say 600
odd KM )? in two way SSB coms on 40 mtrs and the Dipole in fact
is oriented more to? make? communications possible with NSW and
QLD possible? ?AS for the Adam Rong SPECIAL? ?Pixie -? that's
'still in bits. I think it will get built as? Mighty Mike US
design? instead.? Three stage? 7-8 W out, possibly as much as?
11W? if RD16HH is used? .? Ie Toss the PCB and just use the
parts.?
regards,
I'm impressed that? a Maglev exists in? Shanghai.? If you
came to? Auckland in 80 year's time you'd find no trams and no
Maglev.? Just a bunch of corrupt politicians and "Nippon
Klippon? " extensions to the harbour bridge that had snapped
off and fallen into the sea.? That's the slang name for the?
two lane extensions on the? Auck Harbour bridge.? They were
built in Japan but to a UK design and barged out.?
Timothy E. Fidler : Engineer BE Mech Auckland?
?HR Call? ZL1MZR? (HF)
Telephone Whangarei?? 022? 691 8405
---------- Original Message ----------
Guys,
You can visit my shack and let's do some CPK kit building together. See
this post:
Thanks,
Adam
|
Re: If you visit Shanghai
Mighty? Mike CW? ?Tx? design is attached.? ?With an RD16HH? RF mosfet as the PA? ?I'd expect? 9-10 W out minimum esp if run at? 15V.? It needs to be frequency mobile and it needs a keyer? ?chip.?
Just my random? thoughts.? ?Add a modulator? cct for low power AM too ?? Just like the old days of? 6t9 compactron? single valve 7 W transmitters but? a good deal safer....
The PDF has name? Mighty Mile... that's not my fault it's as received.
|
Re: If you visit Shanghai
Adam? I saw the post and translated it as I need a nother? six months for full fluency in Mandarin.
I'm sure the? travel costs in the local? Shanghai Metro are very low? but unfortunately the? airfare? Auckland? to Shanghai is? abit high to you know.. pop over for a weekend of Kit building.? ? My G1M? xeigu has pulled in? 100 W SSB signals from as far away south as the Katlins which are back of Dunedin. It pulls in? NSW? SSB and? VIctorian SSB any night you care to turn it on.? It's the antenna build and the Obvious? skill of the operator that makes this all possible.?
THe Seven watts has been heard way down Wellington way (say 600 odd KM )? in two way SSB coms on 40 mtrs and the Dipole in fact is oriented more to? make? communications possible with NSW and QLD possible? ?AS for the Adam Rong SPECIAL? ?Pixie -? that's 'still in bits. I think it will get built as? Mighty Mike US design? instead.? Three stage? 7-8 W out, possibly as much as? 11W? if RD16HH is used? .? Ie Toss the PCB and just use the parts.?
regards,
I'm impressed that? a Maglev exists in? Shanghai.? If you came to? Auckland in 80 year's time you'd find no trams and no Maglev.? Just a bunch of corrupt politicians and "Nippon Klippon? " extensions to the harbour bridge that had snapped off and fallen into the sea.? That's the slang name for the? two lane extensions on the? Auck Harbour bridge.? They were built in Japan but to a UK design and barged out.?
Timothy E. Fidler : Engineer BE Mech Auckland?
?HR Call? ZL1MZR? (HF)
Telephone Whangarei?? 022? 691 8405
e: Engstr@...
toggle quoted message
Show quoted text
On Sun Sep 15 2024 Adam Rong <rongxh@...> wrote:
---------- Original Message ----------
Guys,
You can visit my shack and let's do some CPK kit building together. See
this post:
https://mp.weixin./s/uRZCcKSIWmaPZzf35C-h5g
Thanks,
Adam
|
I have a Tecsun PL-368 and it is a great compact receiver for CW and SSB reception. The tecsun plus the CPK-4 make a fine combination.
I wish I have miniture equipment when I started doing portable operation 45 years ago.
Mike N2MS
toggle quoted message
Show quoted text
On 09/15/2024 6:37 PM EDT Adam Rong <rongxh@...> wrote:
And a short field demo video by BA6QH/QRP. I think his receiver is a Tecsun PL-368. I suppose it is the first QSO by CPK-4. He mentioned many years ago his first TX was a similar one with bigger power.
CPK-4 Field Demo by BA6QH/QRP (youtube.com) () Thanks, Adam
在 2024/9/12 21:36, Adam Rong via groups.io 写道:
Just updated the tracking information. I guess some people still haven't watched my CPK-4 kit build video: CPK-4 QRPP CW TX Build (youtube.com) () Thanks, Adam
在 2024/9/12 16:01, Adam Rong via groups.io 写道:
Guys,
Just shipped all the CPK-4 backlog orders. Will update tracking numbers in PayPal or via email if you pay as family or friend.
Thanks, Adam
|
And a short field demo video by BA6QH/QRP. I think his receiver
is a Tecsun PL-368. I suppose it is the first QSO by CPK-4. He
mentioned many years ago his first TX was a similar one with
bigger power.
Thanks,
Adam
在 2024/9/12 21:36, Adam Rong via
groups.io 写道:
toggle quoted message
Show quoted text
Just updated the tracking information.
I guess some people still haven't watched my CPK-4 kit build
video:
Thanks,
Adam
在 2024/9/12 16:01, Adam Rong via
groups.io 写道:
Guys,
Just shipped all the CPK-4 backlog orders. Will update
tracking numbers in PayPal or via email if you pay as family
or friend.
?
Thanks Gary.
Guys,
Shipped the first batch Monday and will continue the
following days. The orders are stronger than expected.
在 2024年9月9日,06:26,Gary Freeman
via groups.io <ZSUGF@...>
写道:
?
Hi, Adam
Thanks for the $25 price offer.? I went ahead and
ordered from the website at the $30 rate.? Thanks
for your products.
72 de Gary W0ITT
Hi Gary,
You just caught the last bus of 25 bucks for 3
CPK-4 kits.
I have just published the manual, video, and
price. You guys can order directly from my web
shop now.
Thanks,
Adam
On 2024/9/7 9:47,
Gary Freeman via groups.io wrote:
Hi, Adam
If you have inventory, put me down for a
CPK-4.? I will send you the $25 shortly.?
Still using PayPal?
72 de Gary W0ITT
Gary Freeman
203 East Proctor Street
Sturgeon, MO? 65284
USA
Thanks!
25 bucks for 7030, 10106 and
14060 total 3 kits plus shipping.
?
Adam:
Does the 25 includes 3 sets or is
it? 25 for each ?
73
Guys,
I have done the test and the
performance is consistent. You can
make PayPal payment 25 USD each
set of 3 CPK-4 kits (7030, 10106,
and 14060) including shipping
directly to
rongxh@... and leave
your ship to address. The assembly
manual will be available in the
folder
[email protected] | Files no
later than September 18.

Thanks,
Adam
在 2024/9/3 7:10, Adam Rong via
写道:
Jim,
Thanks for your interest. I
will ship a few next Monday. The
early bird price is 25 USD
including shipping for the
assortment of 3 CPK-4 kits:
7030, 10106 and 14060. The RF
output is 300-500 mW at 9V,
higher than PIXIE2, especially
for 20m band.
Thanks,
Adam
在 2024/9/2 11:10, Jim WB4ILP
via 写道:
Hi Adam !
How much and
when will it be available?
Perfect to
pair with my Ten Tec RX320.?
Thanks !
Jim WB4ILP?
Guys,
CPK-4 is a crystal
controlled QRPP CW TX. I
wish to offer 40, 30 and
20m on QRP frequencies.
It works with any SSB
receiver on hand.
![]()
See this post in
Chinese:
Thanks,
Adam
|
Guys,
You can visit my shack and let's do some CPK kit building together. See this post:
Thanks,
Adam
|
Re: Testing RX-888 MK2 High Performance SDR
The guys just announced a web based high performance SDR receiver called Web-888. You can visit this page to try the performance:
?
And, this is the product page.
?
Thanks,
Adam
|
Just updated the tracking information.
I guess some people still haven't watched my CPK-4 kit build
video:
Thanks,
Adam
在 2024/9/12 16:01, Adam Rong via
groups.io 写道:
toggle quoted message
Show quoted text
Guys,
Just shipped all the CPK-4 backlog orders. Will update
tracking numbers in PayPal or via email if you pay as family or
friend.
?
Thanks Gary.
Guys,
Shipped the first batch Monday and will continue the
following days. The orders are stronger than expected.
在 2024年9月9日,06:26,Gary Freeman
via groups.io <ZSUGF@...> 写道:
?
Hi, Adam
Thanks for the $25 price offer.? I went ahead and
ordered from the website at the $30 rate.? Thanks
for your products.
72 de Gary W0ITT
Hi Gary,
You just caught the last bus of 25 bucks for 3
CPK-4 kits.
I have just published the manual, video, and
price. You guys can order directly from my web
shop now.
Thanks,
Adam
On 2024/9/7 9:47,
Gary Freeman via groups.io wrote:
Hi, Adam
If you have inventory, put me down for a CPK-4.?
I will send you the $25 shortly.? Still using
PayPal?
72 de Gary W0ITT
Gary Freeman
203 East Proctor Street
Sturgeon, MO? 65284
USA
Thanks!
25 bucks for 7030, 10106 and 14060
total 3 kits plus shipping.
?
Adam:
Does the 25 includes 3 sets or is it?
25 for each ?
73
Guys,
I have done the test and the
performance is consistent. You can
make PayPal payment 25 USD each set
of 3 CPK-4 kits (7030, 10106, and
14060) including shipping directly
to
rongxh@... and leave
your ship to address. The assembly
manual will be available in the
folder
[email protected] | Files no
later than September 18.

Thanks,
Adam
在 2024/9/3 7:10, Adam Rong via 写道:
Jim,
Thanks for your interest. I will
ship a few next Monday. The early
bird price is 25 USD including
shipping for the assortment of 3
CPK-4 kits: 7030, 10106 and 14060.
The RF output is 300-500 mW at 9V,
higher than PIXIE2, especially for
20m band.
Thanks,
Adam
在 2024/9/2 11:10, Jim WB4ILP
via 写道:
Hi Adam !
How much and
when will it be available?
Perfect to pair
with my Ten Tec RX320.?
Thanks !
Jim WB4ILP?
Guys,
CPK-4 is a crystal
controlled QRPP CW TX. I
wish to offer 40, 30 and
20m on QRP frequencies. It
works with any SSB
receiver on hand.
![]()
See this post in Chinese:
Thanks,
Adam
|
Guys,
Just shipped all the CPK-4 backlog orders. Will update tracking numbers in PayPal or via email if you pay as family or friend.
toggle quoted message
Show quoted text
在 2024年9月11日,07:43,Adam Rong via groups.io <rongxh@...> 写道:
? Thanks Gary.
Guys,
Shipped the first batch Monday and will continue the following days. The orders are stronger than expected. 在 2024年9月9日,06:26,Gary Freeman via groups.io <ZSUGF@...> 写道:
?
Hi, Adam
Thanks for the $25 price offer.? I went ahead and ordered from the website at the $30 rate.? Thanks for your products.
72 de Gary W0ITT
Hi Gary,
You just caught the last bus of 25 bucks for 3 CPK-4 kits.
I have just published the manual, video, and price. You guys can order directly from my web shop now.
Thanks,
Adam
On 2024/9/7 9:47, Gary Freeman via groups.io wrote:
Hi, Adam
If you have inventory, put me down for a CPK-4.? I will send you the $25 shortly.? Still using PayPal?
72 de Gary W0ITT
Gary Freeman
203 East Proctor Street
Sturgeon, MO? 65284
USA
Thanks!
25 bucks for 7030, 10106 and 14060 total 3 kits plus shipping.
?
Adam:
Does the 25 includes 3 sets or is it? 25 for each ?
73
Guys,
I have done the test and the performance is consistent. You can make PayPal payment 25 USD each set of 3 CPK-4 kits (7030, 10106, and 14060) including shipping directly to
rongxh@... and leave your ship to address. The assembly manual will be available in the folder
[email protected] | Files no later than September 18.

Thanks,
Adam
在 2024/9/3 7:10, Adam Rong via 写道:
Jim,
Thanks for your interest. I will ship a few next Monday. The early bird price is 25 USD including shipping for the assortment of 3 CPK-4 kits: 7030, 10106 and 14060. The RF output is 300-500 mW at 9V, higher than PIXIE2, especially for 20m band.
Thanks,
Adam
在 2024/9/2 11:10, Jim WB4ILP via 写道:
Hi Adam !
How much and when will it be available?
Perfect to pair with my Ten Tec RX320.?
Thanks !
Jim WB4ILP?
Guys,
CPK-4 is a crystal controlled QRPP CW TX. I wish to offer 40, 30 and 20m on QRP frequencies. It works with any SSB receiver on hand.
![]()
See this post in Chinese:
Thanks,
Adam
|
File /CPK4/CPK-4 QRPP CW TX Assembly Manual.pdf updated
#file-notice
The following files and folders have been updated in the Files area of the [email protected] group.
By: Adam Rong <rongxh@...>
Description:
CPK-4 Assembly Manual, formal release
|
Thanks Gary.
Guys,
Shipped the first batch Monday and will continue the following days. The orders are stronger than expected.
toggle quoted message
Show quoted text
在 2024年9月9日,06:26,Gary Freeman via groups.io <ZSUGF@...> 写道:
?
Hi, Adam
Thanks for the $25 price offer.? I went ahead and ordered from the website at the $30 rate.? Thanks for your products.
72 de Gary W0ITT
Hi Gary,
You just caught the last bus of 25 bucks for 3 CPK-4 kits.
I have just published the manual, video, and price. You guys can order directly from my web shop now.
Thanks,
Adam
On 2024/9/7 9:47, Gary Freeman via groups.io wrote:
Hi, Adam
If you have inventory, put me down for a CPK-4.? I will send you the $25 shortly.? Still using PayPal?
72 de Gary W0ITT
Gary Freeman
203 East Proctor Street
Sturgeon, MO? 65284
USA
Thanks!
25 bucks for 7030, 10106 and 14060 total 3 kits plus shipping.
?
Adam:
Does the 25 includes 3 sets or is it? 25 for each ?
73
Guys,
I have done the test and the performance is consistent. You can make PayPal payment 25 USD each set of 3 CPK-4 kits (7030, 10106, and 14060) including shipping directly to
rongxh@... and leave your ship to address. The assembly manual will be available in the folder
[email protected] | Files no later than September 18.

Thanks,
Adam
在 2024/9/3 7:10, Adam Rong via 写道:
Jim,
Thanks for your interest. I will ship a few next Monday. The early bird price is 25 USD including shipping for the assortment of 3 CPK-4 kits: 7030, 10106 and 14060. The RF output is 300-500 mW at 9V, higher than PIXIE2, especially for 20m band.
Thanks,
Adam
在 2024/9/2 11:10, Jim WB4ILP via 写道:
Hi Adam !
How much and when will it be available?
Perfect to pair with my Ten Tec RX320.?
Thanks !
Jim WB4ILP?
Guys,
CPK-4 is a crystal controlled QRPP CW TX. I wish to offer 40, 30 and 20m on QRP frequencies. It works with any SSB receiver on hand.
![]()
See this post in Chinese:
Thanks,
Adam
|
Hi, Adam
Thanks for the $25 price offer.? I went ahead and ordered from the website at the $30 rate.? Thanks for your products.
72 de Gary W0ITT
toggle quoted message
Show quoted text
Hi Gary,
You just caught the last bus of 25 bucks for 3 CPK-4 kits.
I have just published the manual, video, and price. You guys can order directly from my web shop now.
Thanks,
Adam
On 2024/9/7 9:47, Gary Freeman via groups.io wrote:
Hi, Adam
If you have inventory, put me down for a CPK-4.? I will send you the $25 shortly.? Still using PayPal?
72 de Gary W0ITT
Gary Freeman
203 East Proctor Street
Sturgeon, MO? 65284
USA
Thanks!
25 bucks for 7030, 10106 and 14060 total 3 kits plus shipping.
?
Adam:
Does the 25 includes 3 sets or is it? 25 for each ?
73
Guys,
I have done the test and the performance is consistent. You can make PayPal payment 25 USD each set of 3 CPK-4 kits (7030, 10106, and 14060) including shipping directly to
rongxh@... and leave your ship to address. The assembly manual will be available in the folder
[email protected] | Files no later than September 18.

Thanks,
Adam
在 2024/9/3 7:10, Adam Rong via 写道:
Jim,
Thanks for your interest. I will ship a few next Monday. The early bird price is 25 USD including shipping for the assortment of 3 CPK-4 kits: 7030, 10106 and 14060. The RF output is 300-500 mW at 9V, higher than PIXIE2, especially for 20m band.
Thanks,
Adam
在 2024/9/2 11:10, Jim WB4ILP via 写道:
Hi Adam !
How much and when will it be available?
Perfect to pair with my Ten Tec RX320.?
Thanks !
Jim WB4ILP?
Guys,
CPK-4 is a crystal controlled QRPP CW TX. I wish to offer 40, 30 and 20m on QRP frequencies. It works with any SSB receiver on hand.
![]()
See this post in Chinese:
Thanks,
Adam
|
Hi Gary,
You just caught the last bus of 25 bucks for 3 CPK-4 kits.
I have just published the manual, video, and price. You guys can
order directly from my web shop now.
Thanks,
Adam
On 2024/9/7 9:47, Gary Freeman via
groups.io wrote:
toggle quoted message
Show quoted text
Hi, Adam
If you have inventory, put me down for a CPK-4.? I will send you
the $25 shortly.? Still using PayPal?
72 de Gary W0ITT
Gary Freeman
203 East Proctor Street
Sturgeon, MO? 65284
USA
Thanks!
25 bucks for 7030, 10106 and 14060 total 3 kits
plus shipping.
?
Adam:
Does the 25 includes 3 sets or is it? 25 for each ?
73
Guys,
I have done the test and the performance is
consistent. You can make PayPal payment 25 USD each
set of 3 CPK-4 kits (7030, 10106, and 14060)
including shipping directly to
rongxh@...
and leave your ship to address. The assembly manual
will be available in the folder
[email protected] | Files no later than
September 18.

Thanks,
Adam
在 2024/9/3 7:10, Adam Rong via 写道:
Jim,
Thanks for your interest. I will ship a few next
Monday. The early bird price is 25 USD including
shipping for the assortment of 3 CPK-4 kits: 7030,
10106 and 14060. The RF output is 300-500 mW at
9V, higher than PIXIE2, especially for 20m band.
Thanks,
Adam
在 2024/9/2 11:10, Jim WB4ILP via 写道:
Hi Adam !
How much and when will it be
available?
Perfect to pair with my Ten Tec
RX320.?
Thanks !
Jim WB4ILP?
Guys,
CPK-4 is a crystal controlled QRPP CW TX.
I wish to offer 40, 30 and 20m on QRP
frequencies. It works with any SSB
receiver on hand.
![]()
See this post in Chinese:
Thanks,
Adam
|
File /CPK4/CPK-4 QRPP CW TX Assembly Manual (Draft).pdf uploaded
#file-notice
The following files and folders have been uploaded to the Files area of the [email protected] group.
By: Adam Rong <rongxh@...>
Description:
CPK-4 Assembly Manual, draft
|