开云体育

As the title says....


I've this temporary and simple setup, in which I feed the output of a DVR to the video input of a 6L. Thru a passive balun and a CAT5. It works with the very quick and very dirty VTP I had put together in D3 (yes, this is a lighting project).

Then I imported a (very nice) VTP into D3, with a video page.

The video does not show. If unplugged, it goes blue, when plugged it's black.

The video shows up fine in the setup screens....


$��%@#!? (If I may say so here).
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90

VTPro will let you draw video and RGB windows on the 6L for some
reason. Make sure you're using the video window (horizontal stripes).

On Tue, Nov 23, 2010 at 1:16 PM, Marc-Etienne HUNEAU <mehuneau@...> wrote:

As the title says....


I've this temporary and simple setup, in which I feed the output of a DVR to the video input of a 6L. Thru a passive balun and a CAT5. It works with the very quick and very dirty VTP I had put together in D3 (yes, this is a lighting project).

Then I imported a (very nice) VTP into D3, with a video page.

The video does not show. If unplugged, it goes blue, when plugged it's black.

The video shows up fine in the setup screens....


$鈧�锟紷#!? (If I may say so here).
--
Marc-Etienne HUNEAU 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 Dark Side of the Room (DSR)
+33 (0)6 615 516 90 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽





[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--
Jeremy Weatherford

Yep, it's a VIDEO, non-RGB window.
Checked.


Le 23 nov. 2010 脿 19:26, Jeremy Weatherford a 茅crit :

VTPro will let you draw video and RGB windows on the 6L for some
reason. Make sure you're using the video window (horizontal stripes).

On Tue, Nov 23, 2010 at 1:16 PM, Marc-Etienne HUNEAU <mehuneau@...> wrote:

As the title says....


I've this temporary and simple setup, in which I feed the output of a DVR to the video input of a 6L. Thru a passive balun and a CAT5. It works with the very quick and very dirty VTP I had put together in D3 (yes, this is a lighting project).

Then I imported a (very nice) VTP into D3, with a video page.

The video does not show. If unplugged, it goes blue, when plugged it's black.

The video shows up fine in the setup screens....


$鈧�锟紷#!? (If I may say so here).
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90





[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--
Jeremy Weatherford

--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90





[Non-text portions of this message have been removed]

Stretching here, but have you tried alternating between "auto detect" and NTSC/Secam settings in the panel setup?

- Chip

Didn't see such options ?

Le 23 nov. 2010 � 20:01, Chip a 閏rit :

Stretching here, but have you tried alternating between "auto detect" and NTSC/Secam settings in the panel setup?

- Chip

--- In Crestron@..., Marc-Etienne HUNEAU <mehuneau@...> wrote:

Yep, it's a VIDEO, non-RGB window.
Checked.


Le 23 nov. 2010 � 19:26, Jeremy Weatherford a 茅crit :

VTPro will let you draw video and RGB windows on the 6L for some
reason. Make sure you're using the video window (horizontal stripes).

On Tue, Nov 23, 2010 at 1:16 PM, Marc-Etienne HUNEAU <mehuneau@...> wrote:

As the title says....


I've this temporary and simple setup, in which I feed the output of a DVR to the video input of a 6L. Thru a passive balun and a CAT5. It works with the very quick and very dirty VTP I had put together in D3 (yes, this is a lighting project).

Then I imported a (very nice) VTP into D3, with a video page.

The video does not show. If unplugged, it goes blue, when plugged it's black.

The video shows up fine in the setup screens....


$鈧�锟紷#!? (If I may say so here).
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90





[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--
Jeremy Weatherford

--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90





[Non-text portions of this message have been removed]

--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90





[Non-text portions of this message have been removed]

Check to see if digital enable is high on the join

My mistake - I was thinking of another panel and assumed the controls were in the 6L as well. Sorry!

- Chip

you mean on the output (as in from the panel) ? So far the video window is not joined.

But yeah, I will.



Le 23 nov. 2010 � 21:10, one in a million a 閏rit :

Check to see if digital enable is high on the join
--- In Crestron@..., Marc-Etienne HUNEAU <mehuneau@...> wrote:

Didn't see such options ?

Le 23 nov. 2010 � 20:01, Chip a 閏rit :

Stretching here, but have you tried alternating between "auto detect" and NTSC/Secam settings in the panel setup?

- Chip

--- In Crestron@..., Marc-Etienne HUNEAU <mehuneau@> wrote:

Yep, it's a VIDEO, non-RGB window.
Checked.


Le 23 nov. 2010 � 19:26, Jeremy Weatherford a 茅crit :

VTPro will let you draw video and RGB windows on the 6L for some
reason. Make sure you're using the video window (horizontal stripes).

On Tue, Nov 23, 2010 at 1:16 PM, Marc-Etienne HUNEAU <mehuneau@> wrote:

As the title says....


I've this temporary and simple setup, in which I feed the output of a DVR to the video input of a 6L. Thru a passive balun and a CAT5. It works with the very quick and very dirty VTP I had put together in D3 (yes, this is a lighting project).

Then I imported a (very nice) VTP into D3, with a video page.

The video does not show. If unplugged, it goes blue, when plugged it's black.

The video shows up fine in the setup screens....


$鈧�锟紷#!? (If I may say so here).
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90









------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--
Jeremy Weatherford

--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90

--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90

--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90





[Non-text portions of this message have been removed]

Incomming. I have a couple 6l and i set the video window to dj13

So Video_On|FB13 made the video work. Else I was having the same problem as you.

Interesting.

First thing tomorrow on the job site then.

--
Marc-Etienne HUNEAU

鈽� 06.615.516.90


Le 23 nov. 2010 脿 22:57, "one in a million" <tdurrant420@...> a 茅crit :

Incomming. I have a couple 6l and i set the video window to dj13

So Video_On|FB13 made the video work. Else I was having the same problem as you.
--- In Crestron@..., Marc-Etienne HUNEAU <mehuneau@...> wrote:

you mean on the output (as in from the panel) ? So far the video window is not joined.

But yeah, I will.



Le 23 nov. 2010 脿 21:10, one in a million a 茅crit :

Check to see if digital enable is high on the join
--- In Crestron@..., Marc-Etienne HUNEAU <mehuneau@> wrote:

Didn't see such options ?

Le 23 nov. 2010 脿 20:01, Chip a 茅crit :

Stretching here, but have you tried alternating between "auto detect" and NTSC/Secam settings in the panel setup?

- Chip

--- In Crestron@..., Marc-Etienne HUNEAU <mehuneau@> wrote:

Yep, it's a VIDEO, non-RGB window.
Checked.


Le 23 nov. 2010 脙 19:26, Jeremy Weatherford a 脙漏crit :

VTPro will let you draw video and RGB windows on the 6L for some
reason. Make sure you're using the video window (horizontal stripes).

On Tue, Nov 23, 2010 at 1:16 PM, Marc-Etienne HUNEAU <mehuneau@> wrote:

As the title says....


I've this temporary and simple setup, in which I feed the output of a DVR to the video input of a 6L. Thru a passive balun and a CAT5. It works with the very quick and very dirty VTP I had put together in D3 (yes, this is a lighting project).

Then I imported a (very nice) VTP into D3, with a video page.

The video does not show. If unplugged, it goes blue, when plugged it's black.

The video shows up fine in the setup screens....


$芒鈥毬�茂驴陆@#!? (If I may say so here).
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90





[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--
Jeremy Weatherford

--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90

--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90





[Non-text portions of this message have been removed]

--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90





[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

I had an issue like this a year or so ago. My issue ended up being a bug with VTPro. When the video window is locked on the page, some options for the video window were disabled (can't remember which options). When I unlocked the video window (so I could move it around) all video settings came back and the video worked. It was very weird. True Blue was stumped on it for a while.

It isn't locked. I sent the file to true blue just in case.

--
Marc-Etienne HUNEAU

鈽� 06.615.516.90


Le 24 nov. 2010 脿 06:42, "gsagent1058" <dmota@...> a 茅crit :

I had an issue like this a year or so ago. My issue ended up being a bug with VTPro. When the video window is locked on the page, some options for the video window were disabled (can't remember which options). When I unlocked the video window (so I could move it around) all video settings came back and the video worked. It was very weird. True Blue was stumped on it for a while.

[Non-text portions of this message have been removed]

Just in case somebody searches and finds this thread :

Update ; we eventually switched to TPMC-9Ls (for other reasons, mainly IP intercom and real estate), and... stumbled on the same video problem.

Crestron was able to reproduce it, and is working on a fix. I'll remind them that I had the same exact problem on my 6Ls before.

Seems to happen less frequently on hard pages (as opposed to subpages). Video either won't show up at all (black screen) or freeze after a while. Especially cool with security cameras.


Le 24 nov. 2010 脿 08:51, Marc-Etienne HUNEAU a 茅crit :

It isn't locked. I sent the file to true blue just in case.

--
Marc-Etienne HUNEAU

鈽� 06.615.516.90


Le 24 nov. 2010 脿 06:42, "gsagent1058" <dmota@...> a 茅crit :

I had an issue like this a year or so ago. My issue ended up being a bug with VTPro. When the video window is locked on the page, some options for the video window were disabled (can't remember which options). When I unlocked the video window (so I could move it around) all video settings came back and the video worked. It was very weird. True Blue was stumped on it for a while.

--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90







[Non-text portions of this message have been removed]