Check to see if digital enable is high on the join
toggle quoted message
Show quoted text
--- In Crestron@..., Marc-Etienne HUNEAU <mehuneau@...> wrote:
Didn't see such options ?
Le 23 nov. 2010 ¨¤ 20:01, Chip a ¨¦crit :
Stretching here, but have you tried alternating between "auto detect" and NTSC/Secam settings in the panel setup?
- Chip
--- In Crestron@..., Marc-Etienne HUNEAU <mehuneau@> wrote:
Yep, it's a VIDEO, non-RGB window.
Checked.
Le 23 nov. 2010 ? 19:26, Jeremy Weatherford a ??crit :
VTPro will let you draw video and RGB windows on the 6L for some
reason. Make sure you're using the video window (horizontal stripes).
On Tue, Nov 23, 2010 at 1:16 PM, Marc-Etienne HUNEAU <mehuneau@> wrote:
As the title says....
I've this temporary and simple setup, in which I feed the output of a DVR to the video input of a 6L. Thru a passive balun and a CAT5. It works with the very quick and very dirty VTP I had put together in D3 (yes, this is a lighting project).
Then I imported a (very nice) VTP into D3, with a video page.
The video does not show. If unplugged, it goes blue, when plugged it's black.
The video shows up fine in the setup screens....
$??????@#!? (If I may say so here).
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90
[Non-text portions of this message have been removed]
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
--
Jeremy Weatherford
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90
[Non-text portions of this message have been removed]
--
Marc-Etienne HUNEAU Dark Side of the Room (DSR)
+33 (0)6 615 516 90
[Non-text portions of this message have been removed]
