Raspberry Pi

micky3corks #179622 Hi Guys, New to the group so bare with me if this topic has already been covered... I would like to purchase a couple of Raspbeery Pi units, but was wondering if there was a control module available for them to be operated by a Pro2? Would be grateful if some one could point me in the right direction. Rgds Mike
kaybee302 All Messages By This Member #179623 Umm. That's kind of a broad question. The Pi is a piece of hardware that runs Linux or Android or whatever operating system that you can find for it. It's just as controllable as any other Linux distro. Nick Sent from my eMail. toggle quoted message Show quoted text On May 21, 2013, at 1:07 PM, micky3corks <micky3corks@...> wrote: Hi Guys, New to the group so bare with me if this topic has already been covered... I would like to purchase a couple of Raspbeery Pi units, but was wondering if there was a control module available for them to be operated by a Pro2? Would be grateful if some one could point me in the right direction. Rgds Mike [Non-text portions of this message have been removed]
micky3corks #179624 Not too sure. Have just being doing some research on Google, and apparently you can connect an IR receiver to it and control it with a remote? If that that is the case then it is easy, but was wondering if it could be controlled via IP etc? Cheers Mike toggle quoted message Show quoted text --- In Crestron@..., Nick Mitchell <nick@...> wrote: Umm. That's kind of a broad question. The Pi is a piece of hardware that runs Linux or Android or whatever operating system that you can find for it. It's just as controllable as any other Linux distro. Nick Sent from my eMail. On May 21, 2013, at 1:07 PM, micky3corks <micky3corks@...> wrote: Hi Guys, New to the group so bare with me if this topic has already been covered... I would like to purchase a couple of Raspbeery Pi units, but was wondering if there was a control module available for them to be operated by a Pro2? Would be grateful if some one could point me in the right direction. Rgds Mike [Non-text portions of this message have been removed]
Jeremy Weatherford All Messages By This Member #179625 What are you trying to control on the Pi? It's basically a computer, you can run software on it to talk to Crestron using any protocol you want. toggle quoted message Show quoted text On Tue, May 21, 2013 at 1:04 PM, micky3corks <micky3corks@...> wrote: Hi Guys, New to the group so bare with me if this topic has already been covered... I would like to purchase a couple of Raspbeery Pi units, but was wondering if there was a control module available for them to be operated by a Pro2? Would be grateful if some one could point me in the right direction. Rgds Mike ------------------------------------ Check out the Files area for useful modules, documents, and drivers. A contact list of Crestron dealers and programmers can be found in the Database area. Yahoo! Groups Links -- Jeremy Weatherford
Tres #179628 it is obvious you don't know what a raspberry pi is. I would just avoid the expense and do some more research as to what the raspberry pi actually is. hint. it is a computer. From: Crestron@... [mailto:Crestron@...] On Behalf Of micky3corks Sent: Tuesday, May 21, 2013 1:26 PM To: Crestron@... Subject: [Crestron] Re: Raspberry Pi Not too sure. Have just being doing some research on Google, and apparently you can connect an IR receiver to it and control it with a remote? If that that is the case then it is easy, but was wondering if it could be controlled via IP etc? Cheers Mike --- In Crestron@... <mailto:Crestron%40yahoogroups.com> , Nick Mitchell <nick@...> wrote: Umm. That's kind of a broad question. The Pi is a piece of hardware that runs Linux or Android or whatever operating system that you can find for it. It's just as controllable as any other Linux distro. Nick Sent from my eMail. On May 21, 2013, at 1:07 PM, micky3corks <micky3corks@...> wrote: Hi Guys, New to the group so bare with me if this topic has already been covered... I would like to purchase a couple of Raspbeery Pi units, but was wondering if there was a control module available for them to be operated by a Pro2? Would be grateful if some one could point me in the right direction. Rgds Mike _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.3343 / Virus Database: 3162/6343 - Release Date: 05/21/13
avninjacolorado All Messages By This Member #179683 Give the guy a break, there are no stupid questions. I haven't worked with the PI but I have messed with the Arduino. If it is anything like the arduino uno then you can just connect rs232 to it and write whatever protocol you want. I would suggest the arduino, it's so easy you can learn it in 5 minutes. You can make a button press or any other event send a string to the crestron. Just parse it on the creston end and make things happen. Good luck. toggle quoted message Show quoted text --- In Crestron@..., "micky3corks" <micky3corks@...> wrote: Hi Guys, New to the group so bare with me if this topic has already been covered... I would like to purchase a couple of Raspbeery Pi units, but was wondering if there was a control module available for them to be operated by a Pro2? Would be grateful if some one could point me in the right direction. Rgds Mike
[email protected] All Messages By This Member #179684 I have a raspberry pi with openelect(xbmc) installed. i just soldered up an IR receiver to the GPIO ports and learned a remote to control it. (or use a pre defined remote like a MCE/apple tv) it has cec control so you can also use the tv remote via HDMI connection (tried this but a bit slow for my liking) also being xbmc you can use the crestron module using json commands. does this help?
Marc Nield #179692 You can also run a Squeezebox server on there () and use the module referred to often on this forum to control that. On 22 May 2013, at 03:41, "read_matt@..." <read_matt@...> wrote: I have a raspberry pi with openelect(xbmc) installed. i just soldered up an IR receiver to the GPIO ports and learned a remote to control it. (or use a pre defined remote like a MCE/apple tv) it has cec control so you can also use the tv remote via HDMI connection (tried this but a bit slow for my liking) also being xbmc you can use the crestron module using json commands. does this help? [Non-text portions of this message have been removed]
micky3corks #179708 Many thanks for the advice, this is a great help. toggle quoted message Show quoted text --- In Crestron@..., "read_matt@..." <read_matt@...> wrote: I have a raspberry pi with openelect(xbmc) installed. i just soldered up an IR receiver to the GPIO ports and learned a remote to control it. (or use a pre defined remote like a MCE/apple tv) it has cec control so you can also use the tv remote via HDMI connection (tried this but a bit slow for my liking) also being xbmc you can use the crestron module using json commands. does this help?

Previous Topic Next Topic

开云体育

Raspberry Pi