|
Modules such as.......?
I'm not familiar with any locked modules - at least not from Crestron, save one or two. And if Crestron DID have locked modules that weren't compatible, I'd expect 'em to fix that! (They can choose the method of fixing - do it themselves, or give me an unlocked version of the module!) :)
- Chip
toggle quoted message
Show quoted text
--- In Crestron@..., "texascbounds" <clbounds@...> wrote:
What is everyone going to do with the modules that are locked and not
compatible with the New Processors??
|
my take was that the discussion was about modules fom other companies/programmers/etc. I'm not sure that this will impact me personally with any regularity, but I agree that drinking is usually the best, first answer.
toggle quoted message
Show quoted text
--- In , "Chip" <.> wrote:
Modules such as.......?
I'm not familiar with any locked modules - at least not from Crestron, save one or two. And if Crestron DID have locked modules that weren't compatible, I'd expect 'em to fix that! (They can choose the method of fixing - do it themselves, or give me an unlocked version of the module!) :)
- Chip
--- In , "texascbounds" <clbounds@> wrote:
What is everyone going to do with the modules that are locked and not
compatible with the New Processors??
|
I might be a little late, but how do you know the modules are not compatible,
as-is?
And if they really aren't, have you tried contacting the module's author?
toggle quoted message
Show quoted text
--- On Monday, February 21, 2011 at 10:10 PM, texascbounds wrote:
One module that I'm aware of is the Lutron RA2 feedback module and a few
others that I have, when I get chance I will post more info.
--- In Crestron@..., "Chip" <cfm@...> wrote:
Modules such as.......?
I'm not familiar with any locked modules - at least not from Crestron,
save one or two. And if Crestron DID have locked modules that weren't
compatible, I'd expect 'em to fix that! (They can choose the method of
fixing - do it themselves, or give me an unlocked version of the module!)
:)
- Chip
--- In Crestron@..., "texascbounds" <clbounds@> wrote:
What is everyone going to do with the modules that are locked and not
compatible with the New Processors??
|
Let me repeat the question... HAVE YOU TRIED CONTACTING THE MODULE'S AUTHOR? --- On Monday, February 21, 2011 at 10:40 PM, texascbounds wrote:
Just tired a project that uses a PMC2+ and swapped it with a PMC2+-XP 4 of
the module are no longer in the project Lutron RA2 Feedback proc, ITOA,
FM/AM Preset Name, warning popup with the notice's. the module that im
seeing are simpl+
--- In Crestron@..., "Tony Golden" <mrgolden@...> wrote:
I might be a little late, but how do you know the modules are not
compatible, as-is?
And if they really aren't, have you tried contacting the module's author?
--- On Monday, February 21, 2011 at 10:10 PM, texascbounds wrote:
One module that I'm aware of is the Lutron RA2 feedback module and a few
others that I have, when I get chance I will post more info.
--- In Crestron@..., "Chip" <cfm@> wrote:
Modules such as.......?
I'm not familiar with any locked modules - at least not from Crestron,
save one or two. And if Crestron DID have locked modules that weren't
compatible, I'd expect 'em to fix that! (They can choose the method of
fixing - do it themselves, or give me an unlocked version of the
module!) :)
- Chip
--- In Crestron@..., "texascbounds" <clbounds@> wrote:
What is everyone going to do with the modules that are locked and not
compatible with the New Processors??
|
I didn't think you were capable of talking in caps! Inconceivable. !!! From: Crestron@... [mailto:Crestron@...] On Behalf Of Tony Golden Sent: Monday, February 21, 2011 10:55 PM To: Crestron@... Subject: RE: [Crestron] Re: New Processors/Software and Modules Issues? Let me repeat the question... HAVE YOU TRIED CONTACTING THE MODULE'S AUTHOR? --- On Monday, February 21, 2011 at 10:40 PM, texascbounds wrote:
Just tired a project that uses a PMC2+ and swapped it with a PMC2+-XP 4 of
the module are no longer in the project Lutron RA2 Feedback proc, ITOA,
FM/AM Preset Name, warning popup with the notice's. the module that im
seeing are simpl+
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "Tony Golden" <mrgolden@...> wrote:
I might be a little late, but how do you know the modules are not
compatible, as-is?
And if they really aren't, have you tried contacting the module's
author?
--- On Monday, February 21, 2011 at 10:10 PM, texascbounds wrote:
One module that I'm aware of is the Lutron RA2 feedback module and a
few others that I have, when I get chance I will post more info.
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> ,
"Chip" <cfm@> wrote:
Modules such as.......?
I'm not familiar with any locked modules - at least not from
Crestron, save one or two. And if Crestron DID have locked modules that
weren't compatible, I'd expect 'em to fix that! (They can choose the method
of fixing - do it themselves, or give me an unlocked version of the
module!) :)
- Chip
--- In Crestron@... <mailto:Crestron%40yahoogroups.com>
, "texascbounds" <clbounds@> wrote:
What is everyone going to do with the modules that are locked and
not compatible with the New Processors??
|
Okay, I just opened a QM-RMC program with several encrypted Simpl and Simpl+ modules, and replaced the processor with a PMC3-XP (there's no such thing as a "PMC2+-XP"). Saved the new program and it compiled fine, with no errors.
Perhaps there's something else wrong with your program?
toggle quoted message
Show quoted text
--- In Crestron@..., "texascbounds" <clbounds@...> wrote:
Just tired a project that uses a PMC2+ and swapped it with a PMC2+-XP 4 of the module are no longer in the project Lutron RA2 Feedback proc, ITOA, FM/AM Preset Name, warning popup with the notice's. the module that im seeing are simpl+
--- In Crestron@..., "Tony Golden" <mrgolden@> wrote:
I might be a little late, but how do you know the modules are not compatible,
as-is?
And if they really aren't, have you tried contacting the module's author?
--- On Monday, February 21, 2011 at 10:10 PM, texascbounds wrote:
One module that I'm aware of is the Lutron RA2 feedback module and a few
others that I have, when I get chance I will post more info.
--- In Crestron@..., "Chip" <cfm@> wrote:
Modules such as.......?
I'm not familiar with any locked modules - at least not from Crestron,
save one or two. And if Crestron DID have locked modules that weren't
compatible, I'd expect 'em to fix that! (They can choose the method of
fixing - do it themselves, or give me an unlocked version of the module!)
:)
- Chip
--- In Crestron@..., "texascbounds" <clbounds@> wrote:
What is everyone going to do with the modules that are locked and not
compatible with the New Processors??
|
You know I hate asking the same questions twice... :-)
toggle quoted message
Show quoted text
--- On Monday, February 21, 2011 at 11:00 PM, Tres wrote:
I didn't think you were capable of talking in caps! Inconceivable. !!!
From: Crestron@... [mailto:Crestron@...] On Behalf
Of Tony Golden
Sent: Monday, February 21, 2011 10:55 PM
To: Crestron@...
Subject: RE: [Crestron] Re: New Processors/Software and Modules Issues?
Let me repeat the question...
HAVE YOU TRIED CONTACTING THE MODULE'S AUTHOR?
--- On Monday, February 21, 2011 at 10:40 PM, texascbounds wrote:
Just tired a project that uses a PMC2+ and swapped it with a PMC2+-XP 4 of
the module are no longer in the project Lutron RA2 Feedback proc, ITOA,
FM/AM Preset Name, warning popup with the notice's. the module that im
seeing are simpl+
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "Tony Golden" <mrgolden@...> wrote:
I might be a little late, but how do you know the modules are not
compatible,
as-is?
And if they really aren't, have you tried contacting the module's
author?
--- On Monday, February 21, 2011 at 10:10 PM, texascbounds wrote:
One module that I'm aware of is the Lutron RA2 feedback module and a
few
others that I have, when I get chance I will post more info.
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> ,
"Chip" <cfm@> wrote:
Modules such as.......?
I'm not familiar with any locked modules - at least not from
Crestron,
save one or two. And if Crestron DID have locked modules that
weren't
compatible, I'd expect 'em to fix that! (They can choose the method
of
fixing - do it themselves, or give me an unlocked version of the
module!)
:)
- Chip
--- In Crestron@... <mailto:Crestron%40yahoogroups.com>
, "texascbounds" <clbounds@> wrote:
What is everyone going to do with the modules that are locked and
not
compatible with the New Processors??
|
Well, "technically" that was two typos :-)
Actually, my mentioning it was not intended as an insult. I merely wanted to
correct the model number, for your, and others', benefit - in case you weren't
aware.
toggle quoted message
Show quoted text
--- On Monday, February 21, 2011 at 11:04 PM, texascbounds wrote:
HAVE YOU EVER CREATED A TYPO !!!
--- In Crestron@..., "Tony Golden" <mrgolden@...> wrote:
Okay, I just opened a QM-RMC program with several encrypted Simpl and
Simpl+ modules, and replaced the processor with a PMC3-XP (there's no such
thing as a "PMC2+-XP"). Saved the new program and it compiled fine, with no
errors.
Perhaps there's something else wrong with your program?
--- In Crestron@..., "texascbounds" <clbounds@> wrote:
Just tired a project that uses a PMC2+ and swapped it with a PMC2+-XP 4
of the module are no longer in the project Lutron RA2 Feedback proc, ITOA,
FM/AM Preset Name, warning popup with the notice's. the module that im
seeing are simpl+
|
If you email me an archive of your program archive I'll try it out...
toggle quoted message
Show quoted text
--- On Monday, February 21, 2011 at 11:11 PM, texascbounds wrote:
Like I posted earlier check the Lutron ra2 feedback processing module and
bring it into a PMC3-XP and then compile it let me know if that works for
you.
--- In Crestron@..., "texascbounds" <clbounds@...> wrote:
Tony,
If you would like I can archive the programs and send them to you if that
would help.
--- In Crestron@..., "Tony Golden" <mrgolden@> wrote:
Okay, I just opened a QM-RMC program with several encrypted Simpl and
Simpl+ modules, and replaced the processor with a PMC3-XP (there's no such
thing as a "PMC2+-XP"). Saved the new program and it compiled fine, with no
errors.
Perhaps there's something else wrong with your program?
--- In Crestron@..., "texascbounds" <clbounds@> wrote:
Just tired a project that uses a PMC2+ and swapped it with a PMC2+-XP
4 of the module are no longer in the project Lutron RA2 Feedback proc,
ITOA, FM/AM Preset Name, warning popup with the notice's. the module that
im seeing are simpl+
|
You keep using that word. I do not think it means what you think it means.
toggle quoted message
Show quoted text
--- On Monday, February 21, 2011 at 11:00 PM, Tres wrote:
I didn't think you were capable of talking in caps! Inconceivable. !!!
|
Maybe, but that wouldn't tell us if there's a problem with *your* program,
software, or PC.
Send me an archive of the program with the old processor in it, then I'll first
make sure I can compile that, before adding the new processor and compiling it
again.
While you're at it, let me know what software versions you're using. The
easiest way is to click Help/About in Simpl, then click Copy To Clipboard.
Finally, take a screenshot of the error message you're getting when you try to
compile it.
Have you talked to anyone at TB about it? If so, what did they say?
toggle quoted message
Show quoted text
--- On Monday, February 21, 2011 at 11:19 PM, texascbounds wrote:
Wouldn't this be just a easy as down loading the Lutron ra2 example and
converting the processor to a PMC3-XP?
--- In Crestron@..., "Tony Golden" <mrgolden@...> wrote:
If you email me an archive of your program archive I'll try it out...
|
--- On Monday, February 21, 2011 at 11:36 PM, texascbounds wrote:
I think I would know if it was my program Don't take offense. Everyone has problems with their program, every now and then :-) have you updated your software for all the new added features? Are you serious? If so then you shouldn't have a problem downloading the example and
converting the processor to see the problem. Again - are you serious? I offered MY time to help YOU, and you're too lazy to send me an archive? And don't forget, it was you who first offered to send an archive. Now, you don't feel like it? Instead, you want *ME* to go find the module, download it, then create a program to test YOUR problem? Is that right? I can't believe I've wasted this much time on it. Hopefully, someone else will learn from it... :-) like they say the program is only as good as the programmer!! How true - and you're confirming my suspicions :-) You also didn't answer the question, again... Inconceivable!!!! --- In Crestron@..., "Tony Golden" <mrgolden@...> wrote:
Maybe, but that wouldn't tell us if there's a problem with *your* program,
software, or PC.
Send me an archive of the program with the old processor in it, then I'll
first make sure I can compile that, before adding the new processor and
compiling it again.
While you're at it, let me know what software versions you're using. The
easiest way is to click Help/About in Simpl, then click Copy To Clipboard.
Finally, take a screenshot of the error message you're getting when you try
to compile it.
Have you talked to anyone at TB about it? If so, what did they say?
--- On Monday, February 21, 2011 at 11:19 PM, texascbounds wrote:
Wouldn't this be just a easy as down loading the Lutron ra2 example and
converting the processor to a PMC3-XP?
--- In Crestron@..., "Tony Golden" <mrgolden@> wrote:
If you email me an archive of your program archive I'll try it out...
|
If that's the case, you should be able to forward those modules to Crestron along with an explanation of the issue. If the author/company is truly no longer around, Crestron should be able to provide you with unlocked versions.
- Chip
toggle quoted message
Show quoted text
--- In Crestron@..., "texascbounds" <clbounds@...> wrote:
Some Companies and Programmers are no longer around to unlock the modules that are Locked and recompile them.
--- In Crestron@..., "Tony Golden" <mrgolden@> wrote:
I might be a little late, but how do you know the modules are not compatible,
as-is?
And if they really aren't, have you tried contacting the module's author?
--- On Monday, February 21, 2011 at 10:10 PM, texascbounds wrote:
One module that I'm aware of is the Lutron RA2 feedback module and a few
others that I have, when I get chance I will post more info.
--- In Crestron@..., "Chip" <cfm@> wrote:
Modules such as.......?
I'm not familiar with any locked modules - at least not from Crestron,
save one or two. And if Crestron DID have locked modules that weren't
compatible, I'd expect 'em to fix that! (They can choose the method of
fixing - do it themselves, or give me an unlocked version of the module!)
:)
- Chip
--- In Crestron@..., "texascbounds" <clbounds@> wrote:
What is everyone going to do with the modules that are locked and not
compatible with the New Processors??
|
Inconceivable.
It's not an official rule, but all group participants are expected to watch the Princess Bride at some point...
- Chip
toggle quoted message
Show quoted text
--- In Crestron@..., "texascbounds" <clbounds@...> wrote:
And what word would that be?
--- In Crestron@..., "Tony Golden" <mrgolden@> wrote:
You keep using that word. I do not think it means what you think it means.
--- On Monday, February 21, 2011 at 11:00 PM, Tres wrote:
I didn't think you were capable of talking in caps! Inconceivable. !!!
|
Yes, there is no way to compile locked S+ modules - why don't ask this feature from TB?
My advise is to wait for a year of using series 3 in commercial projects)
But if situation is exigent (have you another when installing?), let's send me the locked USPs (except serial/activation protect routines, of cause) - I'll recompile em on current S+ for series 3 and send back locked without compile log for keeping developer's shame)
|
FWIW, I just downloaded the "Lutron RadioRA2 Module Demo Pro2 R02.zip"
module from here and replaced the PRO2 with a PMC3-XP. It compiled
fine.
I'm running:
SIMPL Windows: 3.01.24
SIMPL+ 3.03.14
Path: C:\Program Files\Crestron\Simpl
INCLUDE4.DAT Version Information:
File Version: 2.08.46
(2 Series) : 1.73
(3 Series) : 1.13.0041
Data Files:
Path: C:\Program Files\Crestron\Cresdb\Programming
symlib.tio 710 02/17/2011 03:56:04PM
iodev.tio 710 02/17/2011 03:56:02PM
Other Crestron SW:
Device Database: 32.00.020.00
Crestron Database: 24.00.043.00
Crestron Toolbox: 2.25.061.02
SIMPL+ Cross Compiler: 1.3
Legacy Device Tools: Not Available
toggle quoted message
Show quoted text
On Mon, Feb 21, 2011 at 11:11 PM, texascbounds <clbounds@...> wrote:
Like I posted earlier check the Lutron ra2 feedback processing module and bring it into a PMC3-XP and then compile it let me know if that works for you.
--- In Crestron@..., "texascbounds" <clbounds@...> wrote:
Tony,
If you would like I can archive the programs and send them to you if that would help.
--- In Crestron@..., "Tony Golden" <mrgolden@> wrote:
Okay, I just opened a QM-RMC program with several encrypted Simpl and Simpl+ modules, and replaced the processor with a PMC3-XP (there's no such thing as a "PMC2+-XP"). Saved the new program and it compiled fine, with no errors.
Perhaps there's something else wrong with your program?
--- In Crestron@..., "texascbounds" <clbounds@> wrote:
Just tired a project that uses a PMC2+ and swapped it with a PMC2+-XP 4 of the module are no longer in the project Lutron RA2 Feedback proc, ITOA, FM/AM Preset Name, warning popup with the notice's. the module that im seeing are simpl+
--- In Crestron@..., "Tony Golden" <mrgolden@> wrote:
I might be a little late, but how do you know the modules are not compatible,
as-is?
And if they really aren't, have you tried contacting the module's author?
--- On Monday, February 21, 2011 at 10:10 PM, texascbounds wrote:
One module that I'm aware of is the Lutron RA2 feedback module and a few
others that I have, when I get chance I will post more info.
--- In Crestron@..., "Chip" <cfm@> wrote:
Modules such as.......?
I'm not familiar with any locked modules - at least not from Crestron,
save one or two. And if Crestron DID have locked modules that weren't
compatible, I'd expect 'em to fix that! (They can choose the method of
fixing - do it themselves, or give me an unlocked version of the module!)
:)
- Chip
--- In Crestron@..., "texascbounds" <clbounds@> wrote:
What is everyone going to do with the modules that are locked and not
compatible with the New Processors??
|
ah...no... :) On Feb 22, 2011, at 12:23 AM, Chip wrote:
Inconceivable.
It's not an official rule, but all group participants are expected to watch the Princess Bride at some point...
[snip]
|
Awwwwww.
A) You can't blame me for trying, and
B) The movie is funny as hell - you should check it out...
- Chip
toggle quoted message
Show quoted text
--- In Crestron@..., Joseph Vossen <jkv@...> wrote:
ah...no... :)
On Feb 22, 2011, at 12:23 AM, Chip wrote:
Inconceivable.
It's not an official rule, but all group participants are expected to watch the Princess Bride at some point...
[snip]
|
Yeah, you should check it out soon, Joe. I'm sure you'll get a kick out of it.
I'm shocked you haven't seen it already. I know you're older than I am... :-)
toggle quoted message
Show quoted text
--- On Tuesday, February 22, 2011 at 6:54 PM, Chip wrote:
Awwwwww.
A) You can't blame me for trying, and
B) The movie is funny as hell - you should check it out...
- Chip
--- In Crestron@..., Joseph Vossen <jkv@...> wrote:
ah...no... :)
On Feb 22, 2011, at 12:23 AM, Chip wrote:
Inconceivable.
It's not an official rule, but all group participants are expected to
watch the Princess Bride at some point...
[snip]
|
It's from 1987 for cripes sake!
toggle quoted message
Show quoted text
--- In Crestron@..., "Tony Golden" <mrgolden@...> wrote:
Yeah, you should check it out soon, Joe. I'm sure you'll get a kick out of it.
I'm shocked you haven't seen it already. I know you're older than I am... :-)
--- On Tuesday, February 22, 2011 at 6:54 PM, Chip wrote:
Awwwwww.
A) You can't blame me for trying, and
B) The movie is funny as hell - you should check it out...
- Chip
--- In Crestron@..., Joseph Vossen <jkv@> wrote:
ah...no... :)
On Feb 22, 2011, at 12:23 AM, Chip wrote:
Inconceivable.
It's not an official rule, but all group participants are expected to
watch the Princess Bride at some point...
[snip]
|
