开云体育

Lutron Homeworks QSX

Leonardo Lagdameo All Messages By This Member #248750 Hi Guys any one can help me how to control Lutronx QSX i used the module from application market and set all the parameters needed like username/password IP address of the lutron processor and follow all the commands in sample module.
[email protected] All Messages By This Member #248751 I think the crestron processor needs a licence for lutron and without the license installed will block ip control of any device with a MAC address that belongs to Lutrons MAC range toggle quoted message Show quoted text On 11 Jan 2023, at 5:44 pm, Leonardo Lagdameo via groups.io <lagdameo_leonardo@...> wrote: ?Hi Guys any one can help me how to control Lutronx QSX i used the module from application market and set all the parameters needed like username/password IP address of the lutron processor and follow all the commands in sample module.
peery.troy All Messages By This Member #248752 You could always look for an older 3 series processor as well toggle quoted message Show quoted text On Jan 11, 2023, at 06:11, gbnet.hifi@... wrote: ?I think the crestron processor needs a licence for lutron and without the license installed will block ip control of any device with a MAC address that belongs to Lutrons MAC range On 11 Jan 2023, at 5:44 pm, Leonardo Lagdameo via groups.io <lagdameo_leonardo@...> wrote: ?Hi Guys any one can help me how to control Lutronx QSX i used the module from application market and set all the parameters needed like username/password IP address of the lutron processor and follow all the commands in sample module.
[email protected] #248753 Hi Leonardo, I am currently struggling with communication between Crestron and Lutron QSX also so thought I'd reply. As far as I understand, you enter the command processor id appropriately (Probably 1 if you only have 1 processor), IP address and user name and password which should match the credentials setup within the Lutron QSX. I have an XPanel which pulses the "connect" pin of the module which starts the heartbeat of the module and also set the debug pin high so I can see the activity within Toolbox debugger. I am continuously getting the following error: LutronLeapCommLib1{ Reconnect!! } LutronLeapCommLib1{ Connecting to 10.12.200.100 } LutronLeapCommLib1{ SocketStatusChange: SOCKET_STATUS_NO_CONNECT } After reading various threads, I've made sure to have Simpl Windows 4.18p, Crestron Database 211.05.001.00 and Device Database 200.175.001.00 as these were the versions used to create the Demo project on the Crestron Marketplace. From there, I've just been pulling my hair out ... which isn't helping either. Anyone else able to advise?
charliehibbins All Messages By This Member #248754 There was/is a version of crestron firmware (I was doing it on a PRO4, not sure if 3 series are affected) that broke the Lutron integration.? I can't remember the exact firmware version to avoid and not entirely sure if it's been fixed in a later version.? I think I saw on here about the issue originally!
ckangis All Messages By This Member #248756 On Wed, Jan 11, 2023 at 06:10 AM, <gbnet.hifi@...> wrote: I think the crestron processor needs a licence for lutron and without the license installed will block ip control of any device with a MAC address that belongs to Lutrons MAC range I didn't think that was still a thing on more recent FW for 3-series, and even less on 4-series. Can someone confirm?
Jennifer Edelstein All Messages By This Member #248759 As far as I know, you only need a license on certain 3 series processors manufactured during a certain period of time, maybe 2019 ish?
[email protected] #248765 That's interesting. I'll have a look at the firmware issue as I'm using an RMC4!
pearce.bruce #248767 开云体育 No licence for lutron any more? Regards Bruce toggle quoted message Show quoted text On 11 Jan 2023, at 14:54, ckangis <chris@...> wrote: ?On Wed, Jan 11, 2023 at 06:10 AM, <gbnet.hifi@...> wrote: I think the crestron processor needs a licence for lutron and without the license installed will block ip control of any device with a MAC address that belongs to Lutrons MAC range I didn't think that was still a thing on more recent FW for 3-series, and even less on 4-series. Can someone confirm?
[email protected] #248768 Charliehibbins, you were on the money. Updated the firmware on the RMC4 from 4.45 to 4.8 and it finally roared into life ? Thanks for helping, All!
ckangis All Messages By This Member #248771 On Wed, Jan 11, 2023 at 10:34 AM, Jennifer Edelstein wrote: As far as I know, you only need a license on certain 3 series processors manufactured during a certain period of time, maybe 2019 ish? Thanks, Jen! That's what I thought... *** And Congrats on your new position at CCI!!!
[email protected] All Messages By This Member #248773 开云体育 My cp3 needs the lutron licence. ?I’ve had it since 2015 toggle quoted message Show quoted text On 13 Jan 2023, at 5:00 am, ckangis <chris@...> wrote: ?On Wed, Jan 11, 2023 at 10:34 AM, Jennifer Edelstein wrote: As far as I know, you only need a license on certain 3 series processors manufactured during a certain period of time, maybe 2019 ish? Thanks, Jen! That's what I thought... *** And Congrats on your new position at CCI!!!
ckangis All Messages By This Member #248775 On Thu, Jan 12, 2023 at 06:52 PM, <gbnet.hifi@...> wrote: My cp3 needs the lutron licence. ?I’ve had it since 2015 Yeah, that vintage definitely needs a license, the good news is there's 'No Longer' any charge for it...
[email protected] #248779 Just confirming the RMC4 didn't need a license. Although the RMC4 and Lutron were on different VLANs, which I've read can negate the need for a license!?
@johnmax All Messages By This Member #248782 4 Series processors do not need a license.? For 3 series as per tech support, normally if the processor is before March 1st 2017 or after Q3 2019 no Lutron?license?is required. The thing is for the first part they mean if the FIRMWARE is before March 2017- around that time the firmware rolling out forced the need of a license. But frustratingly enough on any new firmware after Q3 2019 they did not remove this check from the firmware. I have had several cases where the processor just changes the System Key on its own which breaks the installed license. A couple of those instances with it repeatedly happening and the customer furious about losing lighting controls at night, Crestron exchanged those processors with newer build dates. So not sure if its really HW or FW related.??
John Gabler All Messages By This Member #248802 Had this exact issue and Crestron provided an RMA AV3.? I noticed that that the SN changed its format.? Went from starting with a 1 and having letters to starting with a 2 and no letters.

Previous Topic Next Topic