开云体育

CP3 FW

ckangis All Messages By This Member #256426 Hi All, I have not been updating CP4's to the latest FW versions as, though I don't use the HomeKit features, I have no confidence that there will be other issues related to the HK/OpenSSL that will bite me...? Thus I've paused at the xxx_2.8003.00056.01.puf firmware for 4-series. ? Regarding 3-series (CP3 primarily) I have paused at the xxx_1.8001.0251.puf Firmware. The latest 3-series version is xxx_1.8001.0295.puf.? release notes don't mention anything about the HK/OpenSSL issue so I'm assuming that this is not an issue with this platform. ? Can others chime in about your use/dis-use and experience with this FW version? ? TIA! ? ?
ckangis All Messages By This Member #256445 Anyone?
Brian Matson All Messages By This Member #256446 Hi Chris, ? I think that everyone is rightfully fearful of updating anything with a Crestron swirl once it is working. ? I updated a CP3 just last week to the latest firmware, but it was running 1.5xxx.xxxx previously. I had to update it to connect to a GW1 which forces network security. It was on a Friday too ... I swore never to update a Crestron device on a Friday! ? However, everything is working without issues. It is my "environmental" processor. So, it's running 8 programs and communicating with the main processor. ? Fingers crossed! Brian
Dean Detton All Messages By This Member #256447 I don’t think I have ever run eight programs on one processor before. ?At most maybe 5. ?Curious what those eight programs are?
Brian Matson All Messages By This Member #256448 Lighting - Communication with Lutron Illumination Shades - Ancient BTX R2D7 Climate - Combination of forced air and radiant Security - ELK Access Control - Combination of custom relays and inputs with communication to old Emerge system IC Realtime - NVR control, some PTZ, alarm notifications Pool / Spa - Pentair Weather - Davis weather station (gives local weather feedback) (communicates to the shade program for wind based awning control and lighting program for skylight closing) That's it! I like the ability to debug and load an individual program without disturbing the others. Main processor is only running 1 program that handles AV and UI.
Hood, Steven All Messages By This Member #256449 开云体育 Sounds like a pretty epic quantity of crosspoint routing… FWIW, I think my CP3 in our gym is running current FW, recently updated from 1.8 or something like that… one program for AV. Not doing anything nearly as extensive as the one you’re running with 8 programs… ? --?Steven ? ? From: crestron@groups.io <crestron@groups.io> on behalf of Brian Matson via groups.io <bmatson@...> Date: Thursday, April 10, 2025 at 8:49?AM To: crestron@groups.io <crestron@groups.io> Subject: Re: [crestron] CP3 FW Lighting - Communication with Lutron Illumination Shades - Ancient BTX R2D7 Climate - Combination of forced air and radiant Security - ELK Access Control - Combination of custom relays and inputs with communication to old Emerge system IC Realtime - NVR control, some PTZ, alarm notifications Pool / Spa - Pentair Weather - Davis weather station (gives local weather feedback) (communicates to the shade program for wind based awning control and lighting program for skylight closing) That's it! I like the ability to debug and load an individual program without disturbing the others. Main processor is only running 1 program that handles AV and UI.

Previous Topic Next Topic