开云体育

I have a existing system with numerous CHV-THSTATs and they are starting to fail in numerous ways so we are switching them out for HZ-THSTATs. When adding them into the existing SIMPL programming most things on the HZ-THSTAT module (version 1.7) are self explanatory and transfer over from the CHV module (old programming that is being removed) but I am getting no feedback from all the setup outputs in the HZ module?(or anything from SLOT6 on the thermostat).?Without that feedback its hard to display the necessary buttons and current state like I did with the CHV module. Does anyone have experience with this type of situation, what am I missing? Thanks in advance!

which feedback signals are you looking for?

I am looking for any feedbacks from the module Crestron HZ-THSTAT Basic Control (ver 1.7) that range from the "AnySpaceSysType_FB"" all the way down to "AutoDeadband_FB". I get no information from any of them. I get feedback from other parts of it and the module is completely connected to the thermostat. I am basically need info on how the thermostat is setup so that the touchscreen knows what to display. It was easy with the CHV module to get those feedbacks.