开云体育

I have seen that people have successfully used Global Cache equipment with Crestron but it seems that it has only been the?global cache ip2ir.? Has anyone used the flex line or? globall connect successfully?? I have tried the global connect and the flex line and both work for for 8 hours or so the don't work anymore , and if program is restarted it will start working again. Neither worked with VC4-PC3.? Does anyone have any insight.? Does the the?global cache ip2ir work solid with the VC4-pC3??

I haven't used VC4, but the IP2IR, iTach Flex, and Global Connect line have all been working great for me with Crestron for the last 10+ years. Some of the WiFi versions have occasionally been flaky, but I'm sure that's the RF environment they're in.
We always use static IP addresses and TCP/IP clients in SIMPL. If you use direct sockets, connect when you need to send a command then disconnect after the response.

We've used all three of the iTach versions (relay, serial, IR) with VC4 and VC4-PC3 without much issue. The only problem I've experienced with the IR is the commands are kind of specific sometimes. Had to relearn commands for a couple devices.?

Was this using the module or tcp/ip client?