开云体育

Let me start by giving Neil much love for the crosspoint flow charts. I finally feel ready to tackle the topic.

Scenario-
xpanel turn on the kitchen audio zone and control the Mirage server.
My confusion comes in at the point of having the swampe as 1002d and the mirage as 1001d (connection fed from an init to econn equipment id). How do I keep the logic (volume up/ down, zone power, music selections) straight when I have to hit my equipment ID first to make the connection to the equipment before I let the logic for that device flow. Ie., zone power on, select mirage, volume...... It feels like I would need a stepper for every button to make/ switch the connection to the current equipment respectively? (best practice?) If I hit volume + then every time I would need to make the equipment id connection first to allow volume + to change to the sonnex. Thanks in advance for the basic help

**


Let me start by giving Neil much love for the crosspoint flow charts. I
finally feel ready to tackle the topic.

Scenario-
xpanel turn on the kitchen audio zone and control the Mirage server.
My confusion comes in at the point of having the swampe as 1002d and the
mirage as 1001d (connection fed from an init to econn equipment id). How do
I keep the logic (volume up/ down, zone power, music selections) straight
when I have to hit my equipment ID first to make the connection to the
equipment before I let the logic for that device flow. Ie., zone power on,
select mirage, volume...... It feels like I would need a stepper for every
button to make/ switch the connection to the current equipment
respectively? (best practice?) If I hit volume + then every time I would
need to make the equipment id connection first to allow volume + to change
to the sonnex. Thanks in advance for the basic help

There should be two layers of crosspoints. One is between the interface
(xpanel) and the audio zone (kitchen). This is driven by audio zone
selection.

The next layer is from the audio zone to the source (Mirage). This is
driven by source selection, after the audio zone has been selected.

Both of these layers are mutually exclusive connections (interlocked) and
are independent of one another. The xpanel can connect to the kitchen,
then select mirage and control the volume of the kitchen zone and the
functions of the Mirage through the kitchen zone. It can also connect to a
different zone and select a different source. The kitchen zone would still
maintain it's connection to the Mirage source.


On Mon, Apr 29, 2013 at 11:19 AM, af8567 <af8567@...> wrote:

**


Let me start by giving Neil much love for the crosspoint flow charts. I
finally feel ready to tackle the topic.

Scenario-
xpanel turn on the kitchen audio zone and control the Mirage server.
My confusion comes in at the point of having the swampe as 1002d and the
mirage as 1001d (connection fed from an init to econn equipment id). How do
I keep the logic (volume up/ down, zone power, music selections) straight
when I have to hit my equipment ID first to make the connection to the
equipment before I let the logic for that device flow. Ie., zone power on,
select mirage, volume...... It feels like I would need a stepper for every
button to make/ switch the connection to the current equipment
respectively? (best practice?) If I hit volume + then every time I would
need to make the equipment id connection first to allow volume + to change
to the sonnex. Thanks in advance for the basic help

Thanks I think I have the basic layout. You probably will be hearing from me again.

--- In Crestron@..., Neil Dorin <neildorin@> wrote:

There should be two layers of crosspoints. One is between the interface
(xpanel) and the audio zone (kitchen). This is driven by audio zone
selection.

The next layer is from the audio zone to the source (Mirage). This is
driven by source selection, after the audio zone has been selected.

Both of these layers are mutually exclusive connections (interlocked) and
are independent of one another. The xpanel can connect to the kitchen,
then select mirage and control the volume of the kitchen zone and the
functions of the Mirage through the kitchen zone. It can also connect to a
different zone and select a different source. The kitchen zone would still
maintain it's connection to the Mirage source.


On Mon, Apr 29, 2013 at 11:19 AM, af8567 <af8567@> wrote:

**


Let me start by giving Neil much love for the crosspoint flow charts. I
finally feel ready to tackle the topic.

Scenario-
xpanel turn on the kitchen audio zone and control the Mirage server.
My confusion comes in at the point of having the swampe as 1002d and the
mirage as 1001d (connection fed from an init to econn equipment id). How do
I keep the logic (volume up/ down, zone power, music selections) straight
when I have to hit my equipment ID first to make the connection to the
equipment before I let the logic for that device flow. Ie., zone power on,
select mirage, volume...... It feels like I would need a stepper for every
button to make/ switch the connection to the current equipment
respectively? (best practice?) If I hit volume + then every time I would
need to make the equipment id connection first to allow volume + to change
to the sonnex. Thanks in advance for the basic help

[Non-text portions of this message have been removed]

Correct. The sonnex does not get a dedicated ecross. Its signals get connected (appropriately) to each audio zone ecross for whatever you want accessible to the interface or manipulated by the program.

Sent from my iPhone

On 2013-04-29, at 2:02 PM, "af8567" <af8567@...> wrote:

as promised....
so my sonnex would get its signals from the kitchen ecross directly? No ecross for the sonnex, is that correct? This would give the xpanel a simultaneous connection for volume and also mirage control through the connection from kitchen to sources
Thanks again for the help

--- In Crestron@..., "af8567" <af8567@> wrote:

Thanks I think I have the basic layout. You probably will be hearing from me again.

--- In Crestron@..., Neil Dorin <neildorin@> wrote:

There should be two layers of crosspoints. One is between the interface
(xpanel) and the audio zone (kitchen). This is driven by audio zone
selection.

The next layer is from the audio zone to the source (Mirage). This is
driven by source selection, after the audio zone has been selected.

Both of these layers are mutually exclusive connections (interlocked) and
are independent of one another. The xpanel can connect to the kitchen,
then select mirage and control the volume of the kitchen zone and the
functions of the Mirage through the kitchen zone. It can also connect to a
different zone and select a different source. The kitchen zone would still
maintain it's connection to the Mirage source.


On Mon, Apr 29, 2013 at 11:19 AM, af8567 <af8567@> wrote:

**


Let me start by giving Neil much love for the crosspoint flow charts. I
finally feel ready to tackle the topic.

Scenario-
xpanel turn on the kitchen audio zone and control the Mirage server.
My confusion comes in at the point of having the swampe as 1002d and the
mirage as 1001d (connection fed from an init to econn equipment id). How do
I keep the logic (volume up/ down, zone power, music selections) straight
when I have to hit my equipment ID first to make the connection to the
equipment before I let the logic for that device flow. Ie., zone power on,
select mirage, volume...... It feels like I would need a stepper for every
button to make/ switch the connection to the current equipment
respectively? (best practice?) If I hit volume + then every time I would
need to make the equipment id connection first to allow volume + to change
to the sonnex. Thanks in advance for the basic help

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]