This camera is a re-branded Minray camera (Chinese). I use the exact same camera branded by another company. I have used hundreds of these. I always Control them with the Vaddio Roboshot module. I use this module with ANY VISCA camera. Works flawlessly.

Tip: if you get the HDBT version of the camera you can connect it directly to a DM input and supply power over HDBT using a Power injector or other POE Power source, or the DM power pack on a DMPS. then you can control the camera over HDBT and only have to ru. One cable to the camera.?
I use them this way everyday.
ping me if you have questions.


Blessings,

Nathan Wells

Hi, I uploaded a Samsung TV IP control using CCD (Crestron certified drivers) example program, hope it helps.

/g/crestron/files/Programs/samsung%20ccd.zip

You have to manually load the driver to the processor (Answer ID:?1000527).

We had no luck getting QE Series to work through RS232.
We also didnt find any documentation that indicated that RS232 works on these models.

Hopefully someone here says otherwise.

Does anyone have information on? the serial protocol for this device. I'm unable to find anything. i'm tring a bunch of crestron modules and no luck yet.?

On Fri, Nov 20, 2020 at 12:13 PM, Gary Miller wrote:

The one that doesn't seems to require?a processor?reboot about once a month to keep it working.?

What?? How am I going to make a living with that!!???

开云体育

Thanks.? I emailed IC Realtime and got the newer module 4.0 and it is working.? Still digging into the text console issue I though I found yesterday with another module in my program.

Anyone notice the text console symbol no longer works in 4 series programs?? I'm getting the following error when my IC Realtime IP module tries to query the mac address for activation.? And of course the module I was given by IC Realtime is password protected so I can't go in and hard code the mac address.

?

Could not obtain console symbol protection mutex for S-2.5.10.3:S-1.10.1 (status: 1460). Did not transmit [maca\x0D]

This was updated today:?

Yes, port 50002 for registration, port 50001 for control and UDP for wake on lan to power on.

Hey Gary,?

just been looking into this, do you know if this module is compatible with the sonoff R3 without flashing tasmota? The newer variants you just need to pop a jumper on and they support http, I was just wondering if the commands are they same???

Should work with a Sony Module

Our university is looking to install the cameras.
Wondering if anyone has any control modules/ or RS-232 commands for this product.

?

Thanks!

Just tried the 1 HW 5 SW method, reload FW.? No dice.
SSHPort shows "SSH Disabled, Port 22".
Seems like I need to enable SSH, but don't see a way to.
Sys Info shows SSH Enabled, but text console says Not Enabled.
I have tried Auth also, and set user/password successfully via USB, but still no IP access.? Pop up says "This device not accepting SSH requests.? Please make sure SSH is enabled...", etc.

Thank you! This player is a different port than the 1000 correct?

Thanks Gary!? Good to 'See' you!!...
Can you confirm the following?...

At a minimum, It looks like I can set things up with just the MPO, with each player's CRPC signals routed thru the MPO router v4
As long as I 'Fix' the volume on the HEOS player, it will present to the client a similar user interface to an Autonomic MMS experience (less similar to Sonos but sort of also...)

TIA!

You may have to completely wipe the unit. You know the 1 HW and 5 SW type reset or it could be the other way around. Then when you go to connect with toolbox, create a user and password at the prompt instead of trying to skip through it by using the default.?