开云体育

"VT Pro-e? Software: Freezes When Compiling Crestron App Project With Custom Theme"
?

Do what Zac said. Uninstall latest SG 2.17 or 2.18 and roll back to 2.15.06.
Confirm everything is working, then you can upgrade back to latest SG & it will continue to work.

Sending a mode command when the unit is OFF does not turn the unit on, but it does change the mode. Its a good old system that only does what it is told to do, and doesn't guess.

have a site where the display has failed, button presses sorta work if you know where to press
just need a working 4L

?mark

By template do you mean custom theme? I had an issue with a custom theme recently and decided to move away from the theme altogether after spending a bunch of time on it. For my scenario the project compile would hang and never complete. I even tried to re-create the theme in Studio by editing a Crestron theme and then replacing all assets (how we've always. Not sure why it didn't work but I still have an open case with Crestron about it. If you figure something out please post the fix.?

I've done a couple of systems with CoolMaster, and send the Power On command before every Mode command. However, I can't say if that's actually required.

The first one was replacing a Mitsubishi G50 controller, and already had the logic for Power On, so I just left it in place. Both jobs were remote, and I never tested to see if Power On was really necessary.

I think I uninstalled all AdobeAir programs and installed it from??to get this fixed.

what port are you using. sample program uses port 24. documentation says port 23.
Not sure if the ports have been set up on VC4 but tech walked in this morning and CBOX is locked up and web interface does not work also.

I've been using mine with the vc-4.? Everything has worked well accept sending CEC commands and/or IR commands to multiple TVs simultaneously.

I resolved my issue by tying 2 IR cables together coming off the one box that was working reliably.? So far, this has been working.?

I have other rooms setup with just one TV and they are stable/reliable.

Have the current modules been tested on vc4? ? I have techs on-site and the Cbox keeps locking up. ?They talked to someone that said to try and stagger the 232 communication to help? ? Shouldn’t the module be doing this. ?

Thanks!

My Question though is: does sending a Mode Command when the unit is OFF, turn the unit ON? or do you have to send the Power ON first and then the Mode command?
TIA

If this is a custom theme + Crestron app project - search here for my post of similar issue. It envolved copying AdobyAir sdk from another machine or something like that.

This was before the flash removal updates, so I would think they fixed this by now.

You can also try installing SmartGraphics 2.15, then up to current (trust me, it makes a difference).?

Trying to remember what I have done in the past to fix this.

I believe I had to move the file to a new folder, rename the file, save the file under a new name or a combination of all these.

I have used the Coolpoint many times on Daikin and Mitsubishi splits and VRV. It works perfectly. As with the normal AC system remote, the Power_OFF and Power_ON are the unit Off/On in its same state. Mode changes H/C/F? and SP adjust Set Point. Only word of caution is don't display Room Temp to the user, unless you have a separate wall mounted sensor in a good place, otherwise it measures the temp in the return plenum by the fan coil, and this is wildly different from the RT. My usual TP layout is a simple ON/OFF, SP with UP/DN and MODE. Sometimes louvre control if appropriate.

Good morning,

I am experiencing complilation issue with my Crestrron App projects.
I am using custom template and to this day everything working corecctly. Now compilations stucks at the end of the process.

Tried to reinstall all Crestron software but problem stioll exists.

Put this on a pc with multiple USB audio cards or Dante?

We've used it and it worked well

Hi All,
I'm integrating my first mini-split system (mitsubishi) with the Cool Automation setup with the v2.1 modules.
Unlike the Crestron stats, the CA modules do not have a Mode_OFF commands. I have discussed with their tech people and they said to use the Power_OFF for Mode OFF, which makes sense for this kind of unit.
This begs the question - does selecting an operating mode (Cool, Heat, etc) automatically turn the system on and select the mode? or do I have to send it the ON command and then the Mode command?

TIA!!

Are you doing this is Simpl# or Simpl+


Thank you
Jon

My latest article, "How the Everything Set Box Handles Smart Home Network Security” is being published by the good folks at Residential Tech Today Magazine on their web site.

Network security in a smart home is becoming more, and more, of an issue.? Everything Set is introducing a new network security appliance, the Everything Set box that uses AI to monitor devices connected to a homeowner's network for malicious activity, including smart devices.? The article explores this new product offering and how it focuses on security while maintaining the privacy of the homeowners.

You can find the article here:



For those interested in earlier articles that I've written, you can find those here:



Finally, for those that want to see even more content I've written about smart home technology you can find that here:



Thanks

Anyone? thank you, F

Guys, have you had ever upgraded a ccs-uc-1 to a ccs-uc-1-AV adding a HDMI and AirMedia license? I?ve a ccs-uc-1 and I would like to add these licences without swapping the hardware. Does anyone knows if it?s a software or a hardware difference? Thank you! F.?